Locate Brownells Cryo Treated Dovetail Cutter Brownells Gunsmith Tools Supplies

Brownells Cryo Treated Dovetail Cutter Brownells Gunsmith Tools Supplies

Brownells Cryo Treated Dovetail Cutter Brownells Gunsmith Tools Supplies

Top Rated Brownells Cryo Treated Dovetail Cutter Brownells Gunsmith Tools Supplies
Customers Top Rated Product!

Retail Price: $59.25

Add to Cart




Weve taken our most popular dovetail cutters and cryogenically treated them to give you a tool that will cut the toughest material and last longer saving down-time and increasing your production. Our cryo-treated tools have been deep-treated to -320degF to change the molecular structure of the metal alloy making them denser and removing the stresses that lead to tool fatigue. Cryo-treated tools do not look different than untreated tools so weve added two rings near the working end to differentiate them from our regular cutters. Mfg: Brownells SPECS: Cryo-treated high-speed steel..
Brownells Cryo Treated Dovetail Cutter Brownells Gunsmith Tools Supplies
Product Number: Power Tools & Accessories
Brand: Brownells
Category: Gunsmith Tools & Supplies

More Information on Brownells Cryo Treated Dovetail Cutter Brownells Gunsmith Tools Supplies






Products Other People Bought Brownells Cryo Treated Dovetail Cutter Brownells Gunsmith Tools Supplies

Brownells Carbide Wilson Dovetail Cutter Brownells Gunsmith Tools Supplies

Brownells Carbide Wilson Dovetail Cutter Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Carbide Wilson Dovetail Cutter Brownells Gunsmith Tools Supplies

Solid carbide 2 (5cm) long. .375 (9.5mm) diameter shaft. 60deg shoulder. Mfg: Brownells

Retail Price: $75.99

More Information about Brownells Carbide Wilson Dovetail Cutter Brownells Gunsmith Tools Supplies

Brownells Hss Front Sight Dovetail Cutter Brownells Gunsmith Tools Supplies

Brownells Hss Front Sight Dovetail Cutter Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Hss Front Sight Dovetail Cutter Brownells Gunsmith Tools Supplies

Cuts lengthwise dovetail required to install special handgun front sights from Jim Clark Ed Brown Bob Marvel and others. Slightly undersized to allow for precise final fitting and to compensate for any machine wear. CAUTION: For use in milling machine only. High speed steel. .300 (7.3mm) diameter cut 3/8 (9.5mm) diameter shank. 60deg or 65deg shoulder. DO NOT EXCEED 700 rpm HIGHER SPEED WILL BREAK TEETH. Mfg: Brownells

Retail Price: $36.99

More Information about Brownells Hss Front Sight Dovetail Cutter Brownells Gunsmith Tools Supplies

Brownells Carbide Front Sight Dovetail Cutter Brownells Gunsmith Tools Supplies

Brownells Carbide Front Sight Dovetail Cutter Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Carbide Front Sight Dovetail Cutter Brownells Gunsmith Tools Supplies

Cuts lengthwise dovetail required to install special handgun front sights from Jim Clark Ed Brown Bob Marvel and others. Slightly undersized to allow for precise final fitting and to compensate for any machine wear. CAUTION: For use in milling machine only. Solid carbide resists wear and easily cuts through even hardened steels. .300 (7.3mm) dia. cut 3/8 (9.5mm) dia. shank. 60deg or 65deg shoulder. Mfg: Brownells

Retail Price: $74.95

More Information about Brownells Carbide Front Sight Dovetail Cutter Brownells Gunsmith Tools Supplies

Brownells High Speed Steel Wilson Dovetail Cutter Brownells Gunsmith Tools Supplies

Brownells High Speed Steel Wilson Dovetail Cutter Brownells Gunsmith Tools Supplies

Customer Rating For Brownells High Speed Steel Wilson Dovetail Cutter Brownells Gunsmith Tools Supplies

HIGHER SPEED WILL BREAK TEETH. Mfg: Brownells

Retail Price: $36.99

More Information about Brownells High Speed Steel Wilson Dovetail Cutter Brownells Gunsmith Tools Supplies

Brownells 1911 Auto Carbide Dovetail Sight Base Cutter Brownells Gunsmith Tools Supplies

Brownells 1911 Auto Carbide Dovetail Sight Base Cutter Brownells Gunsmith Tools Supplies

Customer Rating For Brownells 1911 Auto Carbide Dovetail Sight Base Cutter Brownells Gunsmith Tools Supplies

These cutters are specially designed by us and made to our specifications for cutting the sight base slot required to mount the Wichita and Novak Lo-Mount 1911 Auto sights. Use 1/4 carbide end mill to remove the bulk of the material (see drawing above) then make final dovetail cut. Final cut to lower rear of slide is done with an end mill and is not a part of the sight base cut. Made slightly undersized to compensate for variations in sight bases and milling tolerances on installation. With the popularity of custom 1911 Auto Pistols this cutter is one that you will use frequently in your custom work. CAUTION: For use in milling machine only. Much harder and longer-lasting than HSS cutter. U Mfg: Brownells

Retail Price: $114.99

More Information about Brownells 1911 Auto Carbide Dovetail Sight Base Cutter Brownells Gunsmith Tools Supplies

Brownells Receiver Facing Cutter Pilots Brownells Gunsmith Tools Supplies

Brownells Receiver Facing Cutter Pilots Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Receiver Facing Cutter Pilots Brownells Gunsmith Tools Supplies

Hardened steel cutter and pilots provide the perfect combo for accurizing Remington 700 and AR-15 actions without a lathe. Large 1 1/2 diameter cutter squares the receiver face to the boltway for precise mating to the barrel. Twelve 90deg flutes deliver even pressure and a smooth chatter-free cut when used with Brownells Muzzle Facing & Chamfering T-Handle shown below or our Drill Chuck Adaptor. .700 diameter pilot fits factory-original Remington 700 receivers. Use the .715 Bolt-Way Reamer #513-050-013. 1 facing pilot fits AR-15 upper receivers. Mfg: Brownells SPECS: Hardened steel polished finish. Cutter - 90deg 2 (5.1cm) long x 1 1/2 (3.8cm) O.D. Pilots - 2 long x .700 (17.8mm) or 1 (25.4mm) O.D.

Retail Price: $70.50

More Information about Brownells Receiver Facing Cutter Pilots Brownells Gunsmith Tools Supplies

Brownells Shotgun Bead Facing Cutter Brownells Gunsmith Tools Supplies

Brownells Shotgun Bead Facing Cutter Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Shotgun Bead Facing Cutter Brownells Gunsmith Tools Supplies

No more tilted sloppy looking half square front sight beads. Faces-off the base of Bradley -style (Bev-L-Blok Raybar Sunspot etc.) beads so they end up straight and square to the center of the rib or barrel when tightened. Six-bladed cutter with precisely drilled hollow center accepts bead shank. Turning the handle trims base of the bead at a true 90deg angle thats absolutely square with the shank. Mfg: Brownells SPECS: Six blade cutter high speed steel 3 1/2 (8.8cm) long 1-1/8 (2.8cm) diameter handle.

Retail Price: $34.99

More Information about Brownells Shotgun Bead Facing Cutter Brownells Gunsmith Tools Supplies

Brownells 45 Tin Coated Cylinder Chamfering Cutter Brownells Gunsmith Tools Supplies

Brownells 45 Tin Coated Cylinder Chamfering Cutter Brownells Gunsmith Tools Supplies

Customer Rating For Brownells 45 Tin Coated Cylinder Chamfering Cutter Brownells Gunsmith Tools Supplies

High-speed steel chamfer cutter makes perfect 45deg angle cuts for easier cylinder filling with speed loaders. TiN coating on the cutting surface allows for smooth chatter-free cuts and longer cutting life even on tough metals such as scandium. Also great for chamfering the muzzle on chrome-lined barrels. Available in 1/2 or 5/8 sizes. Mfg: Brownells SPECS: High-speed steel TiN coating on cutting surface. Overall length: 2.4 (61mm). Fits Brownells Muzzle and Cylinder Facing and Chamfering Tool Handle and Pilots.

Retail Price: $64.75

More Information about Brownells 45 Tin Coated Cylinder Chamfering Cutter Brownells Gunsmith Tools Supplies