Locate Brownells Mauser Receiver Holding Fixture Brownells Gunsmith Tools Supplies

Brownells Mauser Receiver Holding Fixture Brownells Gunsmith Tools Supplies

Brownells Mauser Receiver Holding Fixture Brownells Gunsmith Tools Supplies

Top Rated Brownells Mauser Receiver Holding Fixture Brownells Gunsmith Tools Supplies
Customers Top Rated Product!

Retail Price: $89.99

Add to Cart




Provides complete access to these hard-to-hold receivers without the worry of crushing or damage. Securely holds Mauser receivers and barreled actions in a bench vise drill press or milling machine when drilling and tapping for scope bases polishing bolt lapping milling or other modifications. The receiver is rigidly clamped to the fixture using a plate inside the frame rails and/or the stock mounting screws. Fits military and commercial M98 actions. Mfg: Brownells SPECS: Steel blued. 9 (22.8cm) long 1 (2.5cm) wide. Includes clamp plate and bolt..
Brownells Mauser Receiver Holding Fixture Brownells Gunsmith Tools Supplies
Product Number: Rifle Tools
Brand: Brownells
Category: Gunsmith Tools & Supplies

More Information on Brownells Mauser Receiver Holding Fixture Brownells Gunsmith Tools Supplies






Products Other People Bought Brownells Mauser Receiver Holding Fixture Brownells Gunsmith Tools Supplies

Brownells Slide Fitting Bar Holding Fixture Brownells Gunsmith Tools Supplies

Brownells Slide Fitting Bar Holding Fixture Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Slide Fitting Bar Holding Fixture Brownells Gunsmith Tools Supplies

This is the third hand youve been looking for when peening or swaging 1911 Auto frame rails. All-steel tool holds a single or double Slide Fitting Bar securely in place without movement. Makes striking our Rail Swaging Punches with a hammer easier and more accurate. Designed by William A. Smith III of Marietta Georgia. Must be used with current production Slide Fitting Bars equipped with through holes. Mfg: Brownells SPECS: Steel blued. 2.6 (6.6cm) wide. Includes two 1/4 -28 Allen screws and washers.

Retail Price: $30.95

More Information about Brownells Slide Fitting Bar Holding Fixture Brownells Gunsmith Tools Supplies

Brownells Mauser 98 Cross Bolt Wrench Brownells Gunsmith Tools Supplies

Brownells Mauser 98 Cross Bolt Wrench Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Mauser 98 Cross Bolt Wrench Brownells Gunsmith Tools Supplies

Correct pin spacing O.D. and relieved center for fast removal of M-98 stock cross bolts. Replaceable pins. Mfg: Brownells SPECS: 4 1/4 (10.8cm) long x 9/16 (14.3mm) diameter. Tool steel.

Retail Price: $25.99

More Information about Brownells Mauser 98 Cross Bolt Wrench Brownells Gunsmith Tools Supplies

Brownells Mauser Bolt Forging Blocks Brownells Gunsmith Tools Supplies

Brownells Mauser Bolt Forging Blocks Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Mauser Bolt Forging Blocks Brownells Gunsmith Tools Supplies

No-welding method to bend a straight Mauser bolt handle for additional scope clearance. Two machined steel clamping blocks provide full support to the bolt to shape any round knob Mauser bolt; the small ring 93 94 95 96 or large ring 98. Extra large Forming Punch has sufficient mass for complete control lets you apply just the right amount of striking force to precisely bend and shape bolt handle to final contour. With a little practice you can forge the handle so nicely that only a bit of finishing is needed. Punch has curved removable hardened tip that retains its shape with repeated use. Complete instructions explain the entire process. Mfg: Brownells SPECS: Blocks - Steel blue finish. 3 1/2 (8.9cm) long. 2 (5cm) high. Punch - 1 (2.5cm) diameter 8-7/8 (22.5cm) long.

Retail Price: $29.99

More Information about Brownells Mauser Bolt Forging Blocks Brownells Gunsmith Tools Supplies

Brownells Mauser 98 Stock Ferrules Brownells Gunsmith Tools Supplies

Brownells Mauser 98 Stock Ferrules Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Mauser 98 Stock Ferrules Brownells Gunsmith Tools Supplies

A modern update of the original M98 rear triggerguard screw ferrule that prevented overtightening maintained accuracy and kept the stock from splitting. Perfect for fast pillar bedding; our heavy-wall stainless steel ferrule fits all M98 actions and can be easily adapted to fit any rifle action that uses .250 diameter rear stock screws. Can be shortened for front screw application. Mfg: Brownells SPECS: 304S seamless tubing. 1 1/4 (3.1cm) long .375 (9.5mm) OD .279 (7mm) ID. Sold 2 ea.

Retail Price: $6.99

More Information about Brownells Mauser 98 Stock Ferrules Brownells Gunsmith Tools Supplies

Brownells Mini Mauser Rifle Action Wrench Head Brownells Gunsmith Tools Supplies

Brownells Mini Mauser Rifle Action Wrench Head Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Mini Mauser Rifle Action Wrench Head Brownells Gunsmith Tools Supplies

The only commercially available action wrench system that surrounds and supports the receiver ring and recoil lug to distribute potentially damaging torque forces equally. The solid steel base has a unique machined relief to clear the recoil lug on most Mauser-type bolt action rifles and the individual bolt-on Heads are machined to provide an exact fit around and against the receiver ring or barrel nut for each of the firearm models listed. Together they support the receiver in a ring of steel and greatly increase the amount of surface gripping area to totally eliminate twisted bolt ways or damaged ruined receivers. This is the most advanced complete professional-quality Action Wr Mfg: Brownells

Retail Price: $114.99

More Information about Brownells Mini Mauser Rifle Action Wrench Head Brownells Gunsmith Tools Supplies

Brownells Large Ring Mauser Rifle Action Wrench Head Brownells Gunsmith Tools Supplies

Brownells Large Ring Mauser Rifle Action Wrench Head Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Large Ring Mauser Rifle Action Wrench Head Brownells Gunsmith Tools Supplies

The only commercially available action wrench system that surrounds and supports the receiver ring and recoil lug to distribute potentially damaging torque forces equally. The solid steel base has a unique machined relief to clear the recoil lug on most Mauser-type bolt action rifles and the individual bolt-on Heads are machined to provide an exact fit around and against the receiver ring or barrel nut for each of the firearm models listed. Together they support the receiver in a ring of steel and greatly increase the amount of surface gripping area to totally eliminate twisted bolt ways or damaged ruined receivers. This is the most advanced complete professional-quality Action Wr Mfg: Brownells

Retail Price: $52.99

More Information about Brownells Large Ring Mauser Rifle Action Wrench Head Brownells Gunsmith Tools Supplies

Brownells Ar 15 M16 Upper Receiver Lapping Tool Brownells Gunsmith Tools Supplies

Brownells Ar 15 M16 Upper Receiver Lapping Tool Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Ar 15 M16 Upper Receiver Lapping Tool Brownells Gunsmith Tools Supplies

Cold-rolled steel lapping tool chucks into a 3/8 hand drill to easily square the upper receiver face on your AR-15. Helps ensure precise mating of barrel and receiver for added accuracy. Coat face of receiver with aluminum-oxide lapping compound; extra long pilot slides into the bolt carrier tunnel to maintain perfect concentricity with the receiver. Mfg: Brownells SPECS: Cold-rolled steel in the white. 8 1/4 (21cm) long 3/8 (9.5mm) diameter shank.

Retail Price: $34.95

More Information about Brownells Ar 15 M16 Upper Receiver Lapping Tool Brownells Gunsmith Tools Supplies

Brownells Receiver Facing Cutter Pilots Brownells Gunsmith Tools Supplies

Brownells Receiver Facing Cutter Pilots Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Receiver Facing Cutter Pilots Brownells Gunsmith Tools Supplies

Hardened steel cutter and pilots provide the perfect combo for accurizing Remington 700 and AR-15 actions without a lathe. Large 1 1/2 diameter cutter squares the receiver face to the boltway for precise mating to the barrel. Twelve 90deg flutes deliver even pressure and a smooth chatter-free cut when used with Brownells Muzzle Facing & Chamfering T-Handle shown below or our Drill Chuck Adaptor. .700 diameter pilot fits factory-original Remington 700 receivers. Use the .715 Bolt-Way Reamer #513-050-013. 1 facing pilot fits AR-15 upper receivers. Mfg: Brownells SPECS: Hardened steel polished finish. Cutter - 90deg 2 (5.1cm) long x 1 1/2 (3.8cm) O.D. Pilots - 2 long x .700 (17.8mm) or 1 (25.4mm) O.D.

Retail Price: $70.50

More Information about Brownells Receiver Facing Cutter Pilots Brownells Gunsmith Tools Supplies