Locate Brownells Shotgun Barrel Polishing Flex Hone Brownells Gunsmith Tools Supplies

Brownells Shotgun Barrel Polishing Flex Hone Brownells Gunsmith Tools Supplies

Brownells Shotgun Barrel Polishing Flex Hone Brownells Gunsmith Tools Supplies

Top Rated Brownells Shotgun Barrel Polishing Flex Hone Brownells Gunsmith Tools Supplies
Customers Top Rated Product!

Retail Price: $63.99

Add to Cart




Hundreds of abrasive balls mounted on a flexible shaft - the fastest easiest way weve come across to clean and polish older barrels or put a mirror polish in new ones. For used barrels the Medium-Coarse hone followed by the Fine removes rough and tight spots and brings the bore to a bright finish that you can see and feel . . . just run a patch through it before and after; the difference is amazing! We found too that we could feel tight spots during honing and spend extra time on them until they were evened out. On new barrels the Fine hone by itself will bring the factory finish up to a beautiful mirror-bright finish thats a real customer pleaser. Easy to use: Mfg: Brownells SPECS: Flex Hone(R) for Barrels; 10 12 16 20 ga. .410 bore. 33 (83.8cm) long in Med.-Coarse grit (red tip) or Fine grit (light blue tip). Flex Hone(R) for Chambers; 10 12 16 20 ga. .410 bore 12 (6.5cm) long fine grit (light blue only). Set includes Med.-Coarse & Fine.
Brownells Shotgun Barrel Polishing Flex Hone Brownells Gunsmith Tools Supplies
Product Number: Shotgun Tools
Brand: Brownells
Category: Gunsmith Tools & Supplies

More Information on Brownells Shotgun Barrel Polishing Flex Hone Brownells Gunsmith Tools Supplies






Products Other People Bought Brownells Shotgun Barrel Polishing Flex Hone Brownells Gunsmith Tools Supplies

Brownells Flex Hone Rifle Polishing System Brownells Gunsmith Tools Supplies

Brownells Flex Hone Rifle Polishing System Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Flex Hone Rifle Polishing System Brownells Gunsmith Tools Supplies

Silicon carbide abrasive balls polish rough or scored chambers smooth and friction free in only minutes. Helps cure sticky extraction for faster more reliable cycling. Use Flex Hone Oil Only. Mfg: Brownells SPECS: Fine grit silicon carbide abrasive twisted steel shafts. Must be used with Flex Hone oil. 14 (35.5cm) long shank.

Retail Price: $40.95

More Information about Brownells Flex Hone Rifle Polishing System Brownells Gunsmith Tools Supplies

Brownells Shotgun Barrel Hone Brownells Gunsmith Tools Supplies

Brownells Shotgun Barrel Hone Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Shotgun Barrel Hone Brownells Gunsmith Tools Supplies

Ample range for 28 ga. to 12 ga. Flex-drive eliminates chatter gouging. For 1/4 or larger electric drill. Included in choke set. Mfg: Brownells SPECS: 1/4 (6.3mm) shaft 8- 1/2 (21.6cm) long.

Retail Price: $14.99

More Information about Brownells Shotgun Barrel Hone Brownells Gunsmith Tools Supplies

Brownells Barrel Hone Extension Shaft Brownells Gunsmith Tools Supplies

Brownells Barrel Hone Extension Shaft Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Barrel Hone Extension Shaft Brownells Gunsmith Tools Supplies

The extra reach you need for full-length bore polishing with Brownells Barrel Hones and your electric hand drill. Piloted to keep the hone centered for faster better results. Abrasive paper holder helps remove tight spots before honing; 5/16 -27 tpi shotgun bore brush adapter lets you do heavy duty cleaning. Mfg: Brownells SPECS: Kit includes: Shaft - steel 28 (71cm) long 1/4 (6.3mm) dia. Pilots - Nylon .715 (18mm) dia. Abrasive Holder - Steel 2 (5cm) long 1/2 (12.7mm) dia. Brush Adapter - Steel 3/4 (19mm) long. Shaft coupling will accept .250 (6.3) dia. accessories.

Retail Price: $78.99

More Information about Brownells Barrel Hone Extension Shaft Brownells Gunsmith Tools Supplies

Brownells Forcing Cone Flex Hone Brownells Gunsmith Tools Supplies

Brownells Forcing Cone Flex Hone Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Forcing Cone Flex Hone Brownells Gunsmith Tools Supplies

The finishing touch for forcing cones cut with Long Forcing Cone Reamers. Taper matches perfectly so the maximum amount of abrasive media contacts the barrels surface for faster more effective polishing action with less elbow grease and work. Must be used with Flex Hone Oil; use of other oils will destroy the abrasive balls and void the guarantee. Mfg: Brownells SPECS: Medium or Fine grit. 10 (25cm) overall length. Abrasive head 1.625 (4.1cm) long. 12 ga. tapers from .710 to .798 in diameter. 16 ga. tapers from .665 to .745 diameter. 20 ga. tapers from .615 to .699 diameter.

Retail Price: $64.99

More Information about Brownells Forcing Cone Flex Hone Brownells Gunsmith Tools Supplies

Brownells Flex Hone Oil Brownells Gunsmith Tools Supplies

Brownells Flex Hone Oil Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Flex Hone Oil Brownells Gunsmith Tools Supplies

Specially formulated for use with Flex Hones. Contains both honing and lapping oils in a petroleum base that will not harm aluminum brass or steel. (Use of other oils destroys abrasive ball and voids guarantee.) Mfg: Brownells

Retail Price: $21.98

More Information about Brownells Flex Hone Oil Brownells Gunsmith Tools Supplies

Brownells Screw Head Polishing Pin Vise Brownells Gunsmith Tools Supplies

Brownells Screw Head Polishing Pin Vise Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Screw Head Polishing Pin Vise Brownells Gunsmith Tools Supplies

Steel vise securely holds screws and pins in place during polishing to prevent them from flying into the far corners of your shop. Knurled collar tightens evenly without crushing. Mfg: Brownells SPECS: Steel vise and collar plastic handle. 4.75 (12cm) long.

Retail Price: $22.99

More Information about Brownells Screw Head Polishing Pin Vise Brownells Gunsmith Tools Supplies

Brownells Screw Head Polishing Vise Brownells Gunsmith Tools Supplies

Brownells Screw Head Polishing Vise Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Screw Head Polishing Vise Brownells Gunsmith Tools Supplies

Superior way to hold screws and pins when polishing heads. Prevents burned fingers. Screws wont be snapped out of grip by wheel and lost in shop. Mfg: Brownells SPECS: 5 3/4 (14.6cm) overall. 1/4 (6.35mm) max. cap.

Retail Price: $14.99

More Information about Brownells Screw Head Polishing Vise Brownells Gunsmith Tools Supplies

Brownells Handgun Polishing System Brownells Gunsmith Tools Supplies

Brownells Handgun Polishing System Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Handgun Polishing System Brownells Gunsmith Tools Supplies

Polish rough or scored revolver chambers smooth and friction-free in only minutes to cure many extraction problems. Machine marks on semi-auto pistol spring ways disappear for smoother faster hammer fall and improved cycling. Use Flex-Hone Oil Only . Mfg: Brownells SPECS: Med. and Fine grit silicon carbide abrasive twisted steel shafts. Must be used with Flex-Hone oil. Cylinder M/S Housing Hones: 3 (7.6cm) long; 1911 Slide Lug Area Hone: 8 (20.3cm) long; S&W Beretta Sig. Slide Hone: 8 (20.3cm) long.

Retail Price: $34.99

More Information about Brownells Handgun Polishing System Brownells Gunsmith Tools Supplies