Locate Brownells Smle Firing Pin Tool Brownells Gunsmith Tools Supplies

Brownells Smle Firing Pin Tool Brownells Gunsmith Tools Supplies

Brownells Smle Firing Pin Tool Brownells Gunsmith Tools Supplies

Top Rated Brownells Smle Firing Pin Tool Brownells Gunsmith Tools Supplies
Customers Top Rated Product!

Retail Price: $39.99

Add to Cart




Absolutely essential for complete bolt takedown; firing pin or spring replacement on the Lee Enfield. Hollow shaft reaches over the firing pin and fits into the firing pin collar notches. Large plastic handle for good control wont dig into the palm. Much neeeded with the recent increase in SMLE imports. Mfg: Brownells SPECS: 6 (15.2cm) overall. Tool steel hardened to Rc 50-55..
Brownells Smle Firing Pin Tool Brownells Gunsmith Tools Supplies
Product Number: Rifle Tools
Brand: Brownells
Category: Gunsmith Tools & Supplies

More Information on Brownells Smle Firing Pin Tool Brownells Gunsmith Tools Supplies






Products Other People Bought Brownells Smle Firing Pin Tool Brownells Gunsmith Tools Supplies

Brownells Bolt Action Firing Pin Removal Tool Brownells Gunsmith Tools Supplies

Brownells Bolt Action Firing Pin Removal Tool Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Bolt Action Firing Pin Removal Tool Brownells Gunsmith Tools Supplies

A third hand for removing the firing pin from Remington and Ruger bolt action rifles without lost parts or sore fingers that sometimes accompany this tricky job. Install the correct bushing for your rifle in the end of the tool body. Screw the firing pin assembly into the bushing and tighten the threaded steel shank to compress and capture the mainspring. The hollow shank protects the firing pin tip as it slides over the pin to compress the spring. The crosspin can then be driven out with a punch and the spring tension relieved by gradually loosening the shank. Includes bushings for Remington 700 family and Ruger M77(R) Mark II rifles. Built-in storage slot holds the unused bushing on the t Mfg: Brownells SPECS: Aluminum base hardcoat anodized black. Hardened tool steel screw shank and bushings black oxide finish. Body - 5 1/4 (13.34cm) long 1 (2.54cm) wide 1-3/16 (3.02cm) high. Shank - 3 1/2 (8.89cm) long. Fits Remington 700 710 721 722 Model Seven XP-100 M24 and 40X;

Retail Price: $69.99

More Information about Brownells Bolt Action Firing Pin Removal Tool Brownells Gunsmith Tools Supplies

Brownells Firing Pin Protrusion Gauge Brownells Gunsmith Tools Supplies

Brownells Firing Pin Protrusion Gauge Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Firing Pin Protrusion Gauge Brownells Gunsmith Tools Supplies

Essential for properly measuring the amount of the firing pin projecting through the bolt. Too little causes misfires; too much pierced primers. Mfg: Brownells SPECS: Steel. 2 (5.1cm) long 1/4 (6.3mm) wide.

Retail Price: $35.99

More Information about Brownells Firing Pin Protrusion Gauge Brownells Gunsmith Tools Supplies

Brownells Centerfire Rimfire Firing Pin Protrusion Gauge Brownells Gunsmith Tools Supplies

Brownells Centerfire Rimfire Firing Pin Protrusion Gauge Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Centerfire Rimfire Firing Pin Protrusion Gauge Brownells Gunsmith Tools Supplies

Correct firing pin protrusion is critical to the entire ignition sequence. Elliptical face on the recording plunger allows accurate measuring of both rimfire and centerfire pin protrusion to within .0001 . To Use: Unlock plunger place gauge over protruding firing pin lock plunger lift from bolt and mike overall length. Difference between original length and miked overall length of body plus plunger is amount of pin protrusion. Mfg: Brownells SPECS: 1/2 (12.7mm) dia. .90 (23mm) lg. Hardened plunger.

Retail Price: $39.99

More Information about Brownells Centerfire Rimfire Firing Pin Protrusion Gauge Brownells Gunsmith Tools Supplies

Brownells Molded Plastic Tool Handles Brownells Gunsmith Tools Supplies

Brownells Molded Plastic Tool Handles Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Molded Plastic Tool Handles Brownells Gunsmith Tools Supplies

Pre-shaped and drilled handles for screwdrivers chisels etc. Each unbreakable handle has precision-centered hole. If hole is not exact size use a pilot and drill to size and depth needed. For extra small tangs - set with ACRAGLAS(R). Available in clear yellow or solid black. Mfg: Brownells SPECS: L1 - 2 3/4 (7cm) long 5/8 (15.9mm) dia. Hole is 1/8 (3.2mm) dia. L2 - 3 (7.6mm) long 13/16 (20.6mm) dia. Hole is 1/8 (3.2mm) dia. L3 - 3-3/8 (8.6cm) long 15/16 (24mm) dia. Hole is 3/16 (4.8mm) dia. L4 - 3 3/4 (9.5cm) long 1-1/16 (2.7cm) dia. Hole is 1/4 (6.3mm) dia. L5 - 4 1/2

Retail Price: $14.99

More Information about Brownells Molded Plastic Tool Handles Brownells Gunsmith Tools Supplies

Brownells Special Tool Chisel Handles Brownells Gunsmith Tools Supplies

Brownells Special Tool Chisel Handles Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Special Tool Chisel Handles Brownells Gunsmith Tools Supplies

Specially shaped for your own unique tools. Nicely finished with sturdy metal ferrules. Mfg: Brownells SPECS: Approximately .010 (.25mm) diameter drilled hole. 1 = 2.5cm. Sold in Pak of 3.

Retail Price: $4.99

More Information about Brownells Special Tool Chisel Handles Brownells Gunsmith Tools Supplies

Brownells Adjustable File Tool Handle Brownells Gunsmith Tools Supplies

Brownells Adjustable File Tool Handle Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Adjustable File Tool Handle Brownells Gunsmith Tools Supplies

Grips the entire length of file and other tangs. Mfg: Brownells SPECS: Molded handle steel parts. 4-1/8 (10.5cm) lg 1 (2.5cm) dia.

Retail Price: $7.99

More Information about Brownells Adjustable File Tool Handle Brownells Gunsmith Tools Supplies

Brownells Ar 15 M16 Upper Receiver Lapping Tool Brownells Gunsmith Tools Supplies

Brownells Ar 15 M16 Upper Receiver Lapping Tool Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Ar 15 M16 Upper Receiver Lapping Tool Brownells Gunsmith Tools Supplies

Cold-rolled steel lapping tool chucks into a 3/8 hand drill to easily square the upper receiver face on your AR-15. Helps ensure precise mating of barrel and receiver for added accuracy. Coat face of receiver with aluminum-oxide lapping compound; extra long pilot slides into the bolt carrier tunnel to maintain perfect concentricity with the receiver. Mfg: Brownells SPECS: Cold-rolled steel in the white. 8 1/4 (21cm) long 3/8 (9.5mm) diameter shank.

Retail Price: $34.95

More Information about Brownells Ar 15 M16 Upper Receiver Lapping Tool Brownells Gunsmith Tools Supplies

Brownells Military Weapon Takedown Tool Brownells Gunsmith Tools Supplies

Brownells Military Weapon Takedown Tool Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Military Weapon Takedown Tool Brownells Gunsmith Tools Supplies

Handy steel tool eases the task of field stripping a variety of military weapons including the AR-15/M16/M4 M14 and L1A1 rifles as well as the M2 and M240 machine guns. Use the pointed end to remove pins retainers clips and other subassemblies-much easier than using the tip of a cartridge. The other end can serve as a slot-tip screwdriver or pry bar. Deeply knurled handle wont slip and has a solid feel in the hand; adjust handle position by loosening the two hex head screws. Dozens of uses on the workbench and in a field tool kit. Mfg: Brownells SPECS: Steel black oxide finish. 7 1/4 (18.4 cm) long.

Retail Price: $29.95

More Information about Brownells Military Weapon Takedown Tool Brownells Gunsmith Tools Supplies