Locate Clymer Long Forcing Cone Reamer Clymer Gunsmith Tools Supplies

Clymer Long Forcing Cone Reamer Clymer Gunsmith Tools Supplies

Clymer Long Forcing Cone Reamer Clymer Gunsmith Tools Supplies

Top Rated Clymer Long Forcing Cone Reamer Clymer Gunsmith Tools Supplies
Customers Top Rated Product!

Retail Price: $92.95

Add to Cart




Clymers version of the long forcing cone reamer for shotguns extends shorter factory forcing cones to a full 1-3/8 length gently tapered for improved patterns and less recoil. These cutters have eight 8deg flutes which make them very smooth cutting reamers. 12 Gauge cutter has straight flutes and can be used to lengthen the chamber and cut the new forcing cone in one operation or cut the forcing cone only if desired. 20 Gauge cutter has left-hand spiral flutes. The long non-cutting shank makes it possible to alter many barrels using only a large tap handle (shank is 7/16 square) to turn the reamer. An extension may be required on some barrels. a Mfg: Clymer SPECS: HS steel. 8-7/8 (22.5cm) long. 31/2 (8.9cm) long shank. 12-1/2 oz. (35.4g)..
Clymer Long Forcing Cone Reamer Clymer Gunsmith Tools Supplies
Product Number: Barrel Blanks & Tools
Brand: Clymer
Category: Gunsmith Tools & Supplies

More Information on Clymer Long Forcing Cone Reamer Clymer Gunsmith Tools Supplies






Products Other People Bought Clymer Long Forcing Cone Reamer Clymer Gunsmith Tools Supplies

Clymer point 308 Match Reamer Clymer Gunsmith Tools Supplies

Clymer point 308 Match Reamer Clymer Gunsmith Tools Supplies

Customer Rating For Clymer point 308 Match Reamer Clymer Gunsmith Tools Supplies

For military M-852 match ammo (168 gr. bullets M14 length); or any load using Sierra 168 gr. boattail. Mfg: Clymer SPECS: High speed steel finish reamer only.

Retail Price: $115.95

More Information about Clymer point 308 Match Reamer Clymer Gunsmith Tools Supplies

Clymer Muzzle Brake Reamer Clymer Gunsmith Tools Supplies

Clymer Muzzle Brake Reamer Clymer Gunsmith Tools Supplies

Customer Rating For Clymer Muzzle Brake Reamer Clymer Gunsmith Tools Supplies

Aligns the compensator exit hole with the centerline of the bore to help prevent bullet hit. Also cuts a 30deg angle at the crown. Mfg: Clymer SPECS: Tool steel. 1.60 (4mm) cutting length .250 (6.3mm) diameter drive shaft. Must be used in a lathe.

Retail Price: $50.95

More Information about Clymer Muzzle Brake Reamer Clymer Gunsmith Tools Supplies

Clymer Reamer Tap Bushings Clymer Gunsmith Tools Supplies

Clymer Reamer Tap Bushings Clymer Gunsmith Tools Supplies

Customer Rating For Clymer Reamer Tap Bushings Clymer Gunsmith Tools Supplies

Precision ground same bushing fits reamer and tap. Turn blank bushing to fit odd diameters. Mfg: Clymer SPECS: Bronze. 2 (5cm) long.

Retail Price: $11.99

More Information about Clymer Reamer Tap Bushings Clymer Gunsmith Tools Supplies

Clymer Clymer Headspace Gauges dash Go Clymer Gunsmith Tools Supplies

Clymer Clymer Headspace Gauges dash Go Clymer Gunsmith Tools Supplies

Customer Rating For Clymer Clymer Headspace Gauges dash Go Clymer Gunsmith Tools Supplies

The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight accurate safe chamber. Whenever you buy a used gun always check the headspace before firing. Gauges are etched with Go or No-Go and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs. Mfg: Clymer SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30/30 Cartridges are .219 Wasp .219 Zipper .22 Sav HP .30-30 .32 Win Spl .32-40 .375 Win and .38-55. .30/06 Cartridges are .25-06 6.5mm-06 .270 Win .30-06

Retail Price: $25.00

More Information about Clymer Clymer Headspace Gauges dash Go Clymer Gunsmith Tools Supplies

Clymer Clymer Headspace Gauges dash No Go Clymer Gunsmith Tools Supplies

Clymer Clymer Headspace Gauges dash No Go Clymer Gunsmith Tools Supplies

Customer Rating For Clymer Clymer Headspace Gauges dash No Go Clymer Gunsmith Tools Supplies

The only way to accurately measure and test the length of the chamber of the rifle. Essential when chambering a new barrel to ensure a tight accurate safe chamber. Whenever you buy a used gun always check the headspace before firing. Gauges are etched with Go or No-Go and caliber/gauge name for easy identification. Both Forster and Clymer gauges are made to SAAMI specs. Mfg: Clymer SPECS: Machined Steel. Size varies with caliber and gauge style. NOTE: Gauges Interchangeable between calibers have same Stock #. .30/30 Cartridges are .219 Wasp .219 Zipper .22 Sav HP .30-30 .32 Win Spl .32-40 .375 Win and .38-55. .30/06 Cartridges are .25-06 6.5mm-06 .270 Win .30-06 8mm-

Retail Price: $35.00

More Information about Clymer Clymer Headspace Gauges dash No Go Clymer Gunsmith Tools Supplies

Brownells Long Forcing Cone Chamber Reamer Brownells Gunsmith Tools Supplies

Brownells Long Forcing Cone Chamber Reamer Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Long Forcing Cone Chamber Reamer Brownells Gunsmith Tools Supplies

Double-duty reamers lengthen short chambers to modern standard or magnum lengths and cut the new long forcing cone at the same time - OR - will cut a long forcing cone without lengthening the chamber for the gunsmith seeking improved shooting performance for his customer. Flute placement relief and angle are designed to give the best possible results on all types of barrel steel (except on chrome lined barrels of course!). The 1 1/2 long (approximately) forcing cone created is performance proven to give optimum results in any length chamber. (For complete instructions see below our detailed illustrated booklet Measuring and Rechambering Shotgun Chambers.) Reamers a Mfg: Brownells SPECS: 5- 3/4 (14.6cm) long overall. 1 (2.5cm) long hex section: 1/2 (12.7mm) across on 10 12 and 16 ga.; 7/16 (11.1mm) across on 20 ga.; 3/8 (9.5mm) across on .410 (10.4mm). 1- 1/2 (3.8cm) long forcing cone cutting section. 7 flutes straight cut. 10 ga.: use on 10 Gaug

Retail Price: $121.99

More Information about Brownells Long Forcing Cone Chamber Reamer Brownells Gunsmith Tools Supplies

Brownells Spiral Flute Long Forcing Cone Reamer Brownells Gunsmith Tools Supplies

Brownells Spiral Flute Long Forcing Cone Reamer Brownells Gunsmith Tools Supplies

Customer Rating For Brownells Spiral Flute Long Forcing Cone Reamer Brownells Gunsmith Tools Supplies

Lengthening the forcing cone area decreases pellet deformation and felt recoil for a dramatic improvement in pattern density shooting comfort and overall shotgun performance. Custom-made reamers with five spiral flutes increase the cutting surface area for a smooth chatter-free cut on all types of barrel steel. Do not use on chrome lined bores. Hex-drive shank allows the use of a standard square drive socket and T-handle. Mfg: Brownells SPECS: Tool steel five flute spiral cut 6 (15cm) long 1 (2.5cm) long hex section. Hex-drive size listed in chart.

Retail Price: $129.99

More Information about Brownells Spiral Flute Long Forcing Cone Reamer Brownells Gunsmith Tools Supplies

Clymer Rimless Rifle Chambering Reamers Clymer Gunsmith Tools Supplies

Clymer Rimless Rifle Chambering Reamers Clymer Gunsmith Tools Supplies

Customer Rating For Clymer Rimless Rifle Chambering Reamers Clymer Gunsmith Tools Supplies

Made by Clymer a truly dedicated group of gun people from best quality M-7 High-Speed Steel. These are precision tools for the professional gunsmith and will give a lifetime of service when properly cared for. Fully guaranteed. Roughers are .010 smaller in diameter than the final size do not cut the throat area and should be used to save wear on the Finish Reamer when many chambers are to be cut. If only a few chambers will be cut a Finish Reamer is all you need. Superb quality reamers made to SAAMI specifications. Mfg: Clymer SPECS: RIFLE REAMERS - 6 right-hand cutting straight flutes. Solid pilot integral throat. Stocked in Rougher and Finisher. 7/16 round shank with 3/8 square drive. 1/4 round shank on .22 RF. ORDERING: Advise: 1) Stock #. 2) Cartridge Caliber and Name.

Retail Price: $115.99

More Information about Clymer Rimless Rifle Chambering Reamers Clymer Gunsmith Tools Supplies