Locate Egw 1911 Auto Frame Cutter For Wilson Nowlin Ramped Barrel Egw Gunsmith Tools Supplies

Egw 1911 Auto Frame Cutter For Wilson Nowlin Ramped Barrel Egw Gunsmith Tools Supplies

Egw 1911 Auto Frame Cutter For Wilson Nowlin Ramped Barrel Egw Gunsmith Tools Supplies

Top Rated Egw 1911 Auto Frame Cutter For Wilson Nowlin Ramped Barrel Egw Gunsmith Tools Supplies
Customers Top Rated Product!

Retail Price: $60.00

Add to Cart




End-mill cutter helps you quickly convert a standard 1911 frame for precise fit of a Wilson/Nowlin ramped barrel. Use in a lathe or milling machine to cleanly remove the frames feed ramp and true up factory flaws found in many frames to allow proper contact with the barrel feet. Helps ensure a cleaner impact surface that prevents excess battering and uneven stresses on the feet for longer barrel life. Manufactured from U.S.-sourced M42 high-speed tool steel blanks for precise cutting surfaces that stay sharp. One-piece design means nothing to work loose halfway through the job. Shank is long enough to clear full-length dust covers. Mfg: Egw SPECS: Tool steel in-the-white. 6 (15.2cm) long 7/16 (11.1mm) diameter cutter 1/2 (12.7mm) diameter shank..
Egw 1911 Auto Frame Cutter For Wilson Nowlin Ramped Barrel Egw Gunsmith Tools Supplies
Product Number: Handgun Tools
Brand: Egw
Category: Gunsmith Tools & Supplies

More Information on Egw 1911 Auto Frame Cutter For Wilson Nowlin Ramped Barrel Egw Gunsmith Tools Supplies






Products Other People Bought Egw 1911 Auto Frame Cutter For Wilson Nowlin Ramped Barrel Egw Gunsmith Tools Supplies

Nowlin 1911 Auto Ramped Barrel Frame Bridge Nowlin Gunsmith Tools Supplies

Nowlin 1911 Auto Ramped Barrel Frame Bridge Nowlin Gunsmith Tools Supplies

Customer Rating For Nowlin 1911 Auto Ramped Barrel Frame Bridge Nowlin Gunsmith Tools Supplies

Greatly speeds and simplifies a time consuming and difficult step when installing fully ramped barrels in 1911 Auto frames. Custom-ground long-shank end mill helps you get a frame thats cut clean and straight ready to fit. Fully piloted to eliminate bind and it wont lose zero if you take the frame out of the milling vise. Mfg: Nowlin SPECS: Carbon steel bushings 4 1/2 (11.4cm) long overall. Cutter; HSS 7/16 (11mm) dia. 1/2 (12.7mm) dia. shank. Works for all ramped barrels equipped with bottom feet cut square at the rear like Nowlin and Wilson.

Retail Price: $84.95

More Information about Nowlin 1911 Auto Ramped Barrel Frame Bridge Nowlin Gunsmith Tools Supplies

Wilson Combat 1911 Auto Beavertail Fitting Jig Wilson Combat Gunsmith Tools Supplies

Wilson Combat 1911 Auto Beavertail Fitting Jig Wilson Combat Gunsmith Tools Supplies

Customer Rating For Wilson Combat 1911 Auto Beavertail Fitting Jig Wilson Combat Gunsmith Tools Supplies

Provides a precise guide for cutting the frame tangs on 1911 Auto frames; makes short work of installing Wilson High-Ride Beavertails. Install on frame and file up to guide; file will not cut the hardened jig. Remove jig and sand or file to fit. Mfg: Wilson Combat SPECS: Steel in-the-white hardened. Includes jig fasteners and instructions. Fits Wilson and Clark beavertails.

Retail Price: $24.95

More Information about Wilson Combat 1911 Auto Beavertail Fitting Jig Wilson Combat Gunsmith Tools Supplies

Wilson Combat 1911 Auto Spring Caddy Wilson Combat Gunsmith Tools Supplies

Wilson Combat 1911 Auto Spring Caddy Wilson Combat Gunsmith Tools Supplies

Customer Rating For Wilson Combat 1911 Auto Spring Caddy Wilson Combat Gunsmith Tools Supplies

Spare recoil springs SHOK-BUFFS bushing wrench and other guide rod accessories all in one handy pouch that fits right in your shooting bag. Mfg: Wilson Combat SPECS: Kit includes 1 each 8 lb. 10 lb. 12 lb. 15 lb. 17 lb. 18 1/2 lb. Govt. length recoil springs 4 SHOK-BUFFS nylon bushing wrench and one extra-power firing pin spring.

Retail Price: $29.95

More Information about Wilson Combat 1911 Auto Spring Caddy Wilson Combat Gunsmith Tools Supplies

Nowlin 1911 Auto Match Grade Ecm Barrel Nowlin Handgun Parts

Nowlin 1911 Auto Match Grade Ecm Barrel Nowlin Handgun Parts

Customer Rating For Nowlin 1911 Auto Match Grade Ecm Barrel Nowlin Handgun Parts

Triple heat treated highest quality super match-grade barrels deliver maximum accuracy. Groove and bore tolerancesheld to an amazing .0002 by electro-discharge cathode machining (ECM). Unique pre-cut design of the top lugs requires only minor fitting to achieve maximum lug engagement. Rifling is ultra-smooth uniform and precise. Smoother bore boosts velocity with all barrel lengths. Angled edge on the driving band increases gas seal for reduced fouling with all types of bullets plus longer barrel life. Short chambered requires reaming to achieve correct headspace. Reamer pilot diameters: 9mm/.38S - .3445 ; .40 S&W 10mm - .3895 ; .45 ACP - .4405 . Threaded barrels fit tapered slee Mfg: Nowlin SPECS: 416 stainless steel hardened to Rc 40. Over- size hood and feet require gunsmith fitting. Available in 5 (12.7cm) and 6 (15.2cm) lengths. All models .581 (14.7mm) O.D. Plain 5 - .45 ACP only. Unramped. Plain 6 in calibers listed below. Ramped. Threaded 6 has .575 -40 threads

Retail Price: $259.99

More Information about Nowlin 1911 Auto Match Grade Ecm Barrel Nowlin Handgun Parts

Nowlin 1911 Auto Pre Fit Match Grade Ecm Barrel Kit Nowlin Handgun Parts

Nowlin 1911 Auto Pre Fit Match Grade Ecm Barrel Kit Nowlin Handgun Parts

Customer Rating For Nowlin 1911 Auto Pre Fit Match Grade Ecm Barrel Kit Nowlin Handgun Parts

The easiest way to install the superb performance of Nowlins ECM Match-Grade Barrels in your 1911 Auto. Barrel Kit comes complete with a pre-fitted stainless steel bushing barrel link and pin with little-to-no fitting required for installation. Barrels feature pre-fitted hood top lugs and bottom feet that give a very close fit for increased accuracy in most 1911 Autos. Includes factory-standard link and hardened oversize pin. Gold Cup has narrow .385 width hood to fit Colt-style Gold Cup Enhanced and Flat Tops with narrow hood. Non-ramped 5 long .45 ACP only. Mfg: Nowlin SPECS: 416 stainless steel heat treated to Rc 40. Barrel - 6 (15.2cm) 5 (12.7cm) or 4 1/4 (10.8cm) long .581 (14.7mm) O.D. Available ramped or non-ramped in calibers listed. Bushing - .582 (14.8mm) I.D. .701 (17.8mm) O.D. Link - .278 c-to-c.

Retail Price: $259.99

More Information about Nowlin 1911 Auto Pre Fit Match Grade Ecm Barrel Kit Nowlin Handgun Parts

Nowlin 1911 Auto Stainless Steel Barrel Bushings Nowlin Handgun Parts

Nowlin 1911 Auto Stainless Steel Barrel Bushings Nowlin Handgun Parts

Customer Rating For Nowlin 1911 Auto Stainless Steel Barrel Bushings Nowlin Handgun Parts

Premium-grade machined stainless steel bushings ensure a close slide-to-barrel fit for the tight lockup that helps produce consistent accuracy. Heat treated and hardened to stay in spec through thousands of firing cycles. Pre-Fit requires little or no fitting on most 1911 Autos. Quick and easy way to obtain optimum accuracy and proper lock-up. Fits Nowlin Wilson and other .581 O.D. barrels. Oversized requires turning of O.D. and reaming of I.D. to achieve a true match-grade fit for maximum accuracy and secure lock-up. Gunsmith fitting required. Mfg: Nowlin SPECS: 416 stainless steel heat treated natural finish. Pre-Fit - .701 (17.8mm) O.D. .581 (14.8mm) I.D. Oversized - .703 (17.9mm) OD .576 (14.6mm) I.D. Fits Government model.

Retail Price: $18.99

More Information about Nowlin 1911 Auto Stainless Steel Barrel Bushings Nowlin Handgun Parts

Brownells 1911 Auto Barrel Alignment Block Brownells Gunsmith Tools Supplies

Brownells 1911 Auto Barrel Alignment Block Brownells Gunsmith Tools Supplies

Customer Rating For Brownells 1911 Auto Barrel Alignment Block Brownells Gunsmith Tools Supplies

Milled lug slot holds the barrel square in the slide for precise fitting of the hood to the bolt face slot. Provides a quick visual check for hood fit that eliminates time consuming assembly/disassembly for hood fitting. Fits between the slide rails to prevent barrel twist. Aids lockup and accuracy. May require minor fitting to slide. Mfg: Brownells SPECS:Steel black oxide finish. 2 (5 cm) long 3/4 (19mm) wide 1/2 (12.7cm) high. Instructions included.

Retail Price: $39.95

More Information about Brownells 1911 Auto Barrel Alignment Block Brownells Gunsmith Tools Supplies

Brownells 1911 Auto Barrel Locking Lug File Brownells Gunsmith Tools Supplies

Brownells 1911 Auto Barrel Locking Lug File Brownells Gunsmith Tools Supplies

Customer Rating For Brownells 1911 Auto Barrel Locking Lug File Brownells Gunsmith Tools Supplies

Precision surface-ground file deepens barrel locking lugs without increasing width. Safe on two sides to let the gunsmith file to a close fit with no chance of widening lug area. #2 cut Swiss pattern cuts smoothly; little or no additional stoning/polishing is needed. Mfg: Brownells SPECS: 6 (15.2cm) long. .171 (4.35mm) square.

Retail Price: $63.99

More Information about Brownells 1911 Auto Barrel Locking Lug File Brownells Gunsmith Tools Supplies