Locate Us Optics Inc Remington 700 Picatinny Scope Mount Us Optics, Inc Optics Mounting

Us Optics Inc Remington 700 Picatinny Scope Mount Us Optics, Inc Optics Mounting

Us Optics Inc Remington 700 Picatinny Scope Mount Us Optics, Inc Optics Mounting

Top Rated Us Optics Inc Remington 700 Picatinny Scope Mount Us Optics, Inc Optics Mounting
Customers Top Rated Product!

Retail Price: $139.99
ON SALE NOW: $109.99

Add to Cart




Lightweight one-piece tactical base has a built-in 20 MOA forward angle for the extra elevation needed to shoot long range without hitting the limit of your scopes elevation adjustment. Integral MIL-STD 1913 Picatinny rail has 13 cross-slots to accommodate a variety of different-length scope tubes and eye-relief requirements. Four hex-head cap screws secure the base to the top of the receiver using the factory scope base holes. CNC machined from aluminum then hardcoat anodized for durability. Mfg: Us Optics Inc SPECS: 6061 T6 aluminum Type III hardcoat anodized matte black. Includes (5) steel hex-head 6-48 screws (spare screw included). Models available for left-hand (LH) or right-hand (RH) action. Short Action (SA) - 511/16 (14.5cm) long .435 (11mm) high at front receiver ring. 3.2 o.
Us Optics Inc Remington 700 Picatinny Scope Mount Us Optics, Inc Optics Mounting
Product Number: Scope Bases
Brand: Us Optics, Inc
Category: Optics & Mounting

More Information on Us Optics Inc Remington 700 Picatinny Scope Mount Us Optics, Inc Optics Mounting






Products Other People Bought Us Optics Inc Remington 700 Picatinny Scope Mount Us Optics, Inc Optics Mounting

Egw S W Scope Mount Egw Optics Mounting

Egw S W Scope Mount Egw Optics Mounting

Customer Rating For Egw S W Scope Mount Egw Optics Mounting

Ruger - Mounts the scope low on all single and double action revolvers. Requires drilling and tapping two holes. Smith & Wesson - Remove the rear sight and quickly install on newer revolvers drilled and tapped at the factory. Locates the scope on the top strap over the top of the grip for better balance. Accepts Weaver-style rings. Mfg: Egw SPECS: Aluminum anodized finish black or silver. 4 (10cm) long includes mounting screws. S&W fits K L and N frame.

Retail Price: $30.00

More Information about Egw S W Scope Mount Egw Optics Mounting

Lsp S W M 41 Scope Mount Lsp Optics Mounting

Lsp S W M 41 Scope Mount Lsp Optics Mounting

Customer Rating For Lsp S W M 41 Scope Mount Lsp Optics Mounting

Lightweight extra-long scope rail provides plenty of length so eye relief can be precisely tailored for each individual shooter. Matches the recent factory drilled and tapped barrels; drill and tap older barrels. Accepts all Weaver-style rings. Mfg: Lsp SPECS: Aluminum black anodized finish. 6 (15cm) long. Separate models for 7 Long or 5-1/2 Long Heavy barrel. Includes screws instructions.

Retail Price: $31.95

More Information about Lsp S W M 41 Scope Mount Lsp Optics Mounting

Mgw Ar 15 M16 Scope Mount Mgw Optics Mounting

Mgw Ar 15 M16 Scope Mount Mgw Optics Mounting

Customer Rating For Mgw Ar 15 M16 Scope Mount Mgw Optics Mounting

Easy-to-install securely locks into the top of the carry handle with a single thumb screw. Ultra- rigid closed-top design will not crush or deform under pressure from rings. Accepts all Weaver-style rings. Does not obscure the factory sights. Mfg: Mgw SPECS: Extruded aluminum. Black hard-coat anodized matte fin-ish. 1.5 oz. (43g) wt. Includes thumbscrew and lock washer.

Retail Price: $25.99

More Information about Mgw Ar 15 M16 Scope Mount Mgw Optics Mounting

Da Mar Shotgun Scope Mount Da-Mar Optics Mounting

Da Mar Shotgun Scope Mount Da-Mar Optics Mounting

Customer Rating For Da Mar Shotgun Scope Mount Da-Mar Optics Mounting

Wrap-around sub-base puts the mounting screws into the receivers thicker sidewalls for rock-solid no-fail scope mounting even on thin semi-auto receivers. Drill and tap six 6-48 holes then cinch down the lightweight aluminum sub-base plate over the top radius. Aluminum top rail accepts all Weaver-style rings. #1 Mount - Fits Rem 870/1100/11-87/58/11-48 12 ga (2¾ ) Ithaca 51 SKB 20 ga S&W 1000 Browning 2000 Franchi 20 ga. #1A Mount - Fits Rem 870/11-87 Super Mag 12 ga (3 1/2 ). #2 Mount - Fits Rem 870/1100 LT20 11-87 20 ga. #4 Mount - Fits Browning BPS 12 12 (3 1/2 ) ga Browning Gold 10. #6 Mount - Browning A-5 12 ga Browning A-5 12 ga (Belgian) 20 ga Mag 12 (J Mfg: Da-Mar SPECS: Aluminum black anodized. Approx. 5 (12.7cm) long. 2.3 oz. (64 g) approximate wt. Includes screws and instructions. Browning A5 model requires epoxy and screws for mounting.

Retail Price: $54.95

More Information about Da Mar Shotgun Scope Mount Da-Mar Optics Mounting

Pro Mag M14 M1a Tactical Scope Mount Pro Mag Optics Mounting

Pro Mag M14 M1a Tactical Scope Mount Pro Mag Optics Mounting

Customer Rating For Pro Mag M14 M1a Tactical Scope Mount Pro Mag Optics Mounting

All-steel bolt-on mount provides a rock solid platform for a scope red dot or other holographic sighting device on an M14-type rifle. 13-slot rail accepts Weaver -style rings. Three anchor points on receiver make sure the mount wont shift under recoil so theres no loss of zero. Sight channel allows use of the original iron sights without removing scope. Requires removal of stripper clip guide. No permanent modification required. Installation instructions and tools included. Minor fitting may be required. Mfg: Pro Mag SPECS: Machined 4150 chrome-moly steel heat treated to Rc 55 phosphate coated matte black finish. 53/8 (13.6cm) long 13/8 (3.5cm) wide 17/8 (4.7cm) high. 11.9 oz. (337g) weight.

Retail Price: $131.25

More Information about Pro Mag M14 M1a Tactical Scope Mount Pro Mag Optics Mounting

S K No Drill No Tap Scope Mount S K Optics Mounting

S K No Drill No Tap Scope Mount S K Optics Mounting

Customer Rating For S K No Drill No Tap Scope Mount S K Optics Mounting

Direct bolt-on installation; no drilling and tapping required. Replace the original open sights with the S&K Mount; install your favorite scope with a set of Weaver-style rings and go shooting. This is the easiest quickest way weve seen to get smaller groups from these guns without making modifications that could hurt the resale or collector value. Precision-machined and finished in a matte black that doesnt reflect light. Blends in well with the original military finishes. The only way to go when scoping those extra-hard stainless Mini-14s. Models with No rings feature a Weaver-style base; supplied without rings. Mfg: S&K SPECS: Base - Aluminum black matte anodized or powder coated. Sizes vary. S&K 1 Rings - Steel black matte finish. Height: .140 (3.6mm) top of base to bottom of ring. Fits - No. 1 Mk III Lee Enfield also includes instructions to fit Ishapore .308 cal. rifles. Mini-14 will not fit Ranch or Mi

Retail Price: $69.99

More Information about S K No Drill No Tap Scope Mount S K Optics Mounting

Egw One Piece Scope Mount For Rifles Egw Optics Mounting

Egw One Piece Scope Mount For Rifles Egw Optics Mounting

Customer Rating For Egw One Piece Scope Mount For Rifles Egw Optics Mounting

Add the versatility of a one-piece Picatinny scope rail to your rifle or shotgun with no drilling or tapping. Precision machined from extruded aluminum or hardened steel with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief plus great flexibility in scope choice. Some models available with 20 or 30 MOA built-in elevation to aid in long-range shooting without maxing out scope elevation adjustment. Drilled to fit the factory scope mount holes on the guns receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical mounts have a milled center channel for weight reduction; hex-head mounting screws and Allen wrench included. Heavy Duty mounts a Mfg: Egw SPECS: Lightweight Tactical - 6061 T6 aluminum anodized matte black finish. Includes socket head Allen screws and wrench. Heavy Duty - 7075 T6 aluminum mil-spec hardcoat anodized or 4140 chrome-moly steel pre-hardened to Rc 32-35 mil-spec Parkerized matte black. Includes Torx screws and wr

Retail Price: $39.95

More Information about Egw One Piece Scope Mount For Rifles Egw Optics Mounting

Egw One Piece Scope Mount For Shotguns Egw Optics Mounting

Egw One Piece Scope Mount For Shotguns Egw Optics Mounting

Customer Rating For Egw One Piece Scope Mount For Shotguns Egw Optics Mounting

Add the versatility of a one-piece Picatinny scope rail to your shotgun with no drilling or tapping. Precision machined from extruded aluminum or hardened steel with Picatinny slot-and-rail spacing that allows fast and simple changes to eye relief plus great flexibility in scope choice. Drilled to fit the factory scope mount holes on the guns receiver. Accepts Picatinny or Weaver scope rings. Lightweight Tactical (LW) mounts have a milled center channel for weight reduction; hex-head mounting screws and Allen wrench included. Heavy Duty (HD) mounts are .100 lower than the Lightweight mounts to minimize weight and keep your optic closer to the barrel centerline for improved accu Mfg: Egw SPECS: Lightweight Tactical (LW) - 6061 T6 aluminum anodized matte black finish. Includes socket head Allen screws and wrench. Heavy Duty (HD) - 7075 T6 aluminum mil-spec hardcoat anodized or 4140 chrome-moly steel pre-hardened to Rc 32-35 mil-spec Parkerized matte black. Includes Torx screws

Retail Price: $69.99

More Information about Egw One Piece Scope Mount For Shotguns Egw Optics Mounting