Locate Egw Tactical Scope Rings Egw Optics Mounting

Egw Tactical Scope Rings Egw Optics Mounting

Egw Tactical Scope Rings Egw Optics Mounting

Top Rated Egw Tactical Scope Rings Egw Optics Mounting
Customers Top Rated Product!

Retail Price: $124.99

Add to Cart




Heavy duty Picatinny rings are precision machined from solid aluminum billet as matched pairs to aid in obtaining the best possible alignment. Each pair is clamped together and the center holes bored to 30mm to tolerances of +/-.0014 then engraved with matching serial number. In addition the lower halves are marked to prevent separation from their matched ring caps. All edges are beveled or radiused including both sides of the steel ring nut to minimize potential for snagging on other gear. Surfaces are blasted to ensure an even matte finish then hard anodized with a durable black finish for added strength and wear resistance. Crossbolt and nut are machined from chrome-moly steel hea Mfg: Egw SPECS: Rings - Body: Aluminum hardcoat anodized matte black. Crossbolts/Nuts/Cap Screws - Chrome-moly steel blued. Height from top of base to inside bottom of ring: .400 (10.1mm). Fits scopes with 30mm O.D. tubes. Mounts to MIL-STD 1913 Picatinny bases. Inserts - Machined polymer blac.
Egw Tactical Scope Rings Egw Optics Mounting
Product Number: Scope Rings
Brand: Egw
Category: Optics & Mounting

More Information on Egw Tactical Scope Rings Egw Optics Mounting






Products Other People Bought Egw Tactical Scope Rings Egw Optics Mounting

Atk Tactical Scope Rings Atk Optics Mounting

Atk Tactical Scope Rings Atk Optics Mounting

Customer Rating For Atk Tactical Scope Rings Atk Optics Mounting

Oversized rings provide extra contact area for ultra-secure mounting of large optics on hard-recoiling long-range rifles such as sniper rifles. Fits all Weaver-style bases. Six no-strip no-slip Torx(R) screws hold down the ring cap to ensure the scope keeps its position even under heavy recoil. Oversize hex nuts allow quick removal or attachment of optics in dynamic situations. Mfg: Atk SPECS: Aluminum hardcoat anodized matte black. Height measured from top of base to underside of scope body. 1 High - .400 high. Accepts scopes with objectives up to 44mm dia. 1 Extra High - .525 high. Accepts objectives up to 50mm dia. 30mm High - .495 high. Accepts o

Retail Price: $31.99

More Information about Atk Tactical Scope Rings Atk Optics Mounting

Talley Tactical Scope Rings Talley Optics Mounting

Talley Tactical Scope Rings Talley Optics Mounting

Customer Rating For Talley Tactical Scope Rings Talley Optics Mounting

Heavy-duty scope rings are precision-machined from solid billet aluminum with dual recoil lugs to ensure your tactical scope wont budge under the heaviest recoil. Full-width ring caps are cut from the same billet as the bottom half of the ring for precise fit and held in place with four stainless steel Allen head screws that wont work loose when properly tightened. Matching serial numbers ensure you always mate the cap with the bottom it came with. Locking bar heavy-duty crossbolt and oversized 1/2 hex nut locks the ring to any MIL-STD 1913 Picatinny rail. Hard-anodized for extra surface strength with a non-reflective matte black finish. Engraved front and back wi Mfg: Talley SPECS: 7075 T6 aluminum hardcoat anodized matte black with 303 stainless steel screws black finish. 1.9 (5cm) wide .665 (16.8mm) thick. Models available for 1 (2.5cm) or 30mm O.D. scope tubes. Heights measured from top of base to center of ring: Low - 1 (2.5cm); Medium -

Retail Price: $239.99

More Information about Talley Tactical Scope Rings Talley Optics Mounting

Pro Mag M14 M1a Tactical Scope Mount Pro Mag Optics Mounting

Pro Mag M14 M1a Tactical Scope Mount Pro Mag Optics Mounting

Customer Rating For Pro Mag M14 M1a Tactical Scope Mount Pro Mag Optics Mounting

All-steel bolt-on mount provides a rock solid platform for a scope red dot or other holographic sighting device on an M14-type rifle. 13-slot rail accepts Weaver -style rings. Three anchor points on receiver make sure the mount wont shift under recoil so theres no loss of zero. Sight channel allows use of the original iron sights without removing scope. Requires removal of stripper clip guide. No permanent modification required. Installation instructions and tools included. Minor fitting may be required. Mfg: Pro Mag SPECS: Machined 4150 chrome-moly steel heat treated to Rc 55 phosphate coated matte black finish. 53/8 (13.6cm) long 13/8 (3.5cm) wide 17/8 (4.7cm) high. 11.9 oz. (337g) weight.

Retail Price: $131.25

More Information about Pro Mag M14 M1a Tactical Scope Mount Pro Mag Optics Mounting

Atk Remington 700 Tactical Multi Slot Scope Base Atk Optics Mounting

Atk Remington 700 Tactical Multi Slot Scope Base Atk Optics Mounting

Customer Rating For Atk Remington 700 Tactical Multi Slot Scope Base Atk Optics Mounting

One-piece precision machined Weaver rail lets you mount scopes red-dot sights ghost-ring sights and other optics using Weaver-style rings. Plenty of cross-slots allow optimal ring spacing for a wide range of scopes including compact full-size and extra-long scope tubes. Low-profile open center design allows use of front sight when optics are removed. Lightweight aluminum reduces weight without compromising strength. Hardcoat anodized for additional strength and wear resistance. Attaches to factory drilled and tapped receivers using the included steel mounting screws. Mfg: Atk SPECS: Aluminum anodized finish matte black. Steel mounting screws. Short Action (SA) - 57/8 (14.9cm) long. Long Action (LA) - 6 1/4 (15.8cm) long. Fits Rem 700 78 40X-L 721 and 725. Accepts Weaver-style rings.

Retail Price: $20.99

More Information about Atk Remington 700 Tactical Multi Slot Scope Base Atk Optics Mounting

Tactical Solutions Llc Browning Buck Mark Picatinny Scope Mount Tactical Solutions, Llc Optics Mounting

Tactical Solutions Llc Browning Buck Mark Picatinny Scope Mount Tactical Solutions, Llc Optics Mounting

Customer Rating For Tactical Solutions Llc Browning Buck Mark Picatinny Scope Mount Tactical Solutions, Llc Optics Mounting

Lightweight aluminum Picatinny rail replaces factory rib/rear sight and lets you mount an optic while retaining the benefit of backup iron sights. Eight cross-slots let you position the optic for best eye relief. Integral open rear sight adjusts for windage and elevation. Drilled to fit the factory hole spacing and use the original factory rib/rear sight screws. Mfg: Tactical Solutions Llc SPECS: 6061 T6 aluminum hardcoat anodized matte black. Approximately 5 (12.7cm) long 13/16 (21mm) wide 15/32 (12mm) high from top of receiver.

Retail Price: $64.99

More Information about Tactical Solutions Llc Browning Buck Mark Picatinny Scope Mount Tactical Solutions, Llc Optics Mounting

Tactical Solutions Llc Ruger 10 22 Picatinny Scope Mount Tactical Solutions, Llc Optics Mounting

Tactical Solutions Llc Ruger 10 22 Picatinny Scope Mount Tactical Solutions, Llc Optics Mounting

Customer Rating For Tactical Solutions Llc Ruger 10 22 Picatinny Scope Mount Tactical Solutions, Llc Optics Mounting

Precision CNC machined from lightweight 6061 T6 aluminum with MIL-STD 1913 Picatinny rail pattern allows mounting a variety of sights. Easily accommodates different-length scope bodies and provides generous adjustment for eye relief. Drilled to fit the factory hole spacing and includes mounting screws. Accepts both Picatinny and Weaver-style rings. Hardcoat anodized for durability. Available with 0 MOA base or 15 MOA base to help maintain your scopes full elevation adjustment range when shooting at long range. Mfg: Tactical Solutions Llc SPECS: 6061 T6 aluminum hardcoat anodized black matte finish. 4-5/8 (11.7cm) long 13/16 (2.1cm) wide 11/32 (8.7mm) high from top of receiver.

Retail Price: $34.99

More Information about Tactical Solutions Llc Ruger 10 22 Picatinny Scope Mount Tactical Solutions, Llc Optics Mounting

Millett Angle Loc point 22 Scope Rings Millett Optics Mounting

Millett Angle Loc point 22 Scope Rings Millett Optics Mounting

Customer Rating For Millett Angle Loc point 22 Scope Rings Millett Optics Mounting

Precisely align crosshairs to bore without using up your scopes internal adjustments just getting sighted in. 3/8 dovetail steel rings feature dual opposed locking screws for additional windage adjustment. Individual steel clamps give a secure fit to all dovetail receivers. Interlocking alignment guides ensure ring caps are correctly aligned while splined internal surfaces provide a secure grip that helps prevent scope movement. Mfg: Millett SPECS: Steel blue polished or matte finish. Nickel matte finish. 1 (2.5cm) or 30mm (1.18 ) to fit 3/8 dovetail receivers. Ring heights measured from top of base to inside bottom of ring. 1 Low; .275 (6.9mm) 1 Med.; .395 (10mm) 1 High; .525 (13mm). Med. 30mm; .477 (12mm). Sold

Retail Price: $33.99

More Information about Millett Angle Loc point 22 Scope Rings Millett Optics Mounting

Millett Ruger Angle Loc Scope Rings Millett Optics Mounting

Millett Ruger Angle Loc Scope Rings Millett Optics Mounting

Customer Rating For Millett Ruger Angle Loc Scope Rings Millett Optics Mounting

Ruger-style rings by Millett provide additional windage adjustability that helps conserve your scopes internal windage adjustment. Made from heat-treated nickel steel for superb strength and durability. Internal ring surfaces feature Milletts exclusive magnum splines that grip the scope body without damage. Extra-wide recoil shoulders and locking clamps help prevent scope movement or loss of zero caused by recoil. Mfg: Millett SPECS: Steel. Available in polished blue (Smooth) in 1 (2.5mm) or 30mm diameter. Ring heights measured from top of base to inside bottom of ring. High 1 ; .710 (18mm). Med. 30mm; .397 (10mm). Sold in pairs only.

Retail Price: $45.99

More Information about Millett Ruger Angle Loc Scope Rings Millett Optics Mounting