Locate Mc Cann Industries Sirs Rail Mount Mc Cann Industries Optics Mounting

Mc Cann Industries Sirs Rail Mount Mc Cann Industries Optics Mounting

Mc Cann Industries Sirs Rail Mount Mc Cann Industries Optics Mounting

Top Rated Mc Cann Industries Sirs Rail Mount Mc Cann Industries Optics Mounting
Customers Top Rated Product!

Retail Price: $274.99

Add to Cart




Stock Imbedded Rail Mount System (SIRS) lets you install night vision devices optics lasers and additional accessories up front around the barrel and forearm on a bolt action rifle. Features three MIL-STD 1913 Picatinny rails including a 4 top rail that enables mounting of a night vision device in front of an optic. Compact side rails detach easily with an Allen wrench if not needed. Installation requires making a permanent cutout in the forend. Lower half is epoxied into cutout then six steel Allen head screws clamp the top half on for a rock-solid installation that still allows the barrel to free float. Mfg: Mc Cann Industries SPECS: 7075 T6 aluminum hardcoat anodized matte black. 4 (10.2cm) long 3 1/2 (8.9cm) wide 2 1/4 (5.7cm) high. 1 1/4 ID. Requires a forearm at least 1.66 wide and a barrel O.D. not larger than 1.16 . Includes installation instructions..
Mc Cann Industries Sirs Rail Mount Mc Cann Industries Optics Mounting
Product Number: Scope Bases
Brand: Mc Cann Industries
Category: Optics & Mounting

More Information on Mc Cann Industries Sirs Rail Mount Mc Cann Industries Optics Mounting






Products Other People Bought Mc Cann Industries Sirs Rail Mount Mc Cann Industries Optics Mounting

Mc Cann Industries Fors Mount Mc Cann Industries Optics Mounting

Mc Cann Industries Fors Mount Mc Cann Industries Optics Mounting

Customer Rating For Mc Cann Industries Fors Mount Mc Cann Industries Optics Mounting

Lightweight Fiber Optic Rail Sight (FORS) mount lets you install an optic on a tactical shotgun while the integral fiber optic sights provide a great back-up sighting option. Two bright green dots on the rear sight align with the bright orange front sight dot for fast target acquisition in a wide range of light conditions. The 6 1/2 -long 15-slot Picatinny rail accepts most tactical scopes red dot sights or other sighting device. The FORS installs on the top of the receiver on Remington 870 Mossberg 500 Winchester Browning and similar 12 gauge pump shotguns (mounting screws included). Requires drilling and tapping of receiver. Gunsmith installation recommended. Mfg: Mc Cann Industries SPECS: Heat-treated 6061 T6 aluminum hardcoat anodized matte black. 6 1/2 (24cm) long. 11 oz. (312g) weight. Fiber Optic - Orange front rod two green rear rods. Includes (4) steel 8-32 Allen head screws and instructions. Fits Remington 870 Mossberg 500 Winchester Browning and simil

Retail Price: $94.99

More Information about Mc Cann Industries Fors Mount Mc Cann Industries Optics Mounting

Mc Cann Industries M1 Garand Adjustable Gas System Mc Cann Industries Gunsmith Tools Supplies

Mc Cann Industries M1 Garand Adjustable Gas System Mc Cann Industries Gunsmith Tools Supplies

Customer Rating For Mc Cann Industries M1 Garand Adjustable Gas System Mc Cann Industries Gunsmith Tools Supplies

Five interchangeable gas jet screws to apply just the right amount of gas to work the action. Softens the recoil impulse gives a slower cycle time that reduces wear and battering on op rod bolt cam trigger group and receiver. Lets you control case ejection velocity plus prevents dented case necks. Just remove the gas jet screw for conversion to manually cycled single shot function. Mfg: Mc Cann Industries SPECS: Steel blue matte finish. Replaces existing gas nut with no modifications to rifle.

Retail Price: $40.00

More Information about Mc Cann Industries M1 Garand Adjustable Gas System Mc Cann Industries Gunsmith Tools Supplies

Farrell Industries Inc point Fg Force Scope Mount Farrell Industries, Inc. Optics Mounting

Farrell Industries Inc point Fg Force Scope Mount Farrell Industries, Inc. Optics Mounting

Customer Rating For Farrell Industries Inc point Fg Force Scope Mount Farrell Industries, Inc. Optics Mounting

CNC-machined base spreads recoil to help keep scopes even heavy ones on the gun and precisely zeroed from shot to shot. Angled screw wedges against the receiver opening to provide another recoil lug to divert recoil away from the base and mounting screws. Tolerances for straightness and flatness are held within .002 to create a solid platform for your optics. Bedding-compound inletting on mount bottom helps you get a perfect base-to-receiver fit. Self-centering Torx(R) screws help prevent slipping during use. Accepts Picatinny and Weaver-style rings. Available with or without 20 minutes of elevation (MOA). Mfg: Farrell Industries Inc. SPECS: Steel black-oxide finish. Length approximately equal to action length 9/16 (1.4mm) high. Savage Round Top fits models with AccuTrigger. Recoil lug screw is 1/4 -28 mounting screws are 6-48.

Retail Price: $116.99

More Information about Farrell Industries Inc point Fg Force Scope Mount Farrell Industries, Inc. Optics Mounting

Midwest Industries Inc point A 2 Adjustable Cantilever Mount Midwest Industries, Inc. Optics Mounting

Midwest Industries Inc point A 2 Adjustable Cantilever Mount Midwest Industries, Inc. Optics Mounting

Customer Rating For Midwest Industries Inc point A 2 Adjustable Cantilever Mount Midwest Industries, Inc. Optics Mounting

Heavy-duty construction extremely lightweight mount fits perfectly on AR-15/M-16-type carry handles and lets you adjust optic height to co-witness with iron sights in case of battery failure. MIL-STD 1913 rail cantilevers 5 forward of carry handle and adjusts up or down from the side giving optics a solid mounting platform positioned where you want it. Machined from 6061 aluminum and hard-anodized for added strength and scratch resistance in all situations. No gunsmithing required. Mfg: Midwest Industries Inc. SPECS: 6061 billet aluminum black hard-anodized finish. 10-15/16 (27.8cm) overall length. Adjusts from 3/16 (4.8cm) to 3/8 (9.5mm) above front handguard or free float tube. Allen wrench included.

Retail Price: $116.95

More Information about Midwest Industries Inc point A 2 Adjustable Cantilever Mount Midwest Industries, Inc. Optics Mounting

Sadlak Industries M14 M1a Tactical Scope Mount Sadlak Industries Optics Mounting

Sadlak Industries M14 M1a Tactical Scope Mount Sadlak Industries Optics Mounting

Customer Rating For Sadlak Industries M14 M1a Tactical Scope Mount Sadlak Industries Optics Mounting

Helps keep the weight down when adding heavy tactical optics to your M14/M1A. Three-point design clamps down solidly without alteration to the side receiver ring charger guide dovetail and receiver mount lug. Precision-cut rail includes 5deg angle milled on the underside for easy case ejection without hang-ups; accepts Picatinny and Weaver-style rings. Open sight channel gives unobstructed view of back-up iron sights. Standard model is available in three strength-to-weight combinations. Steel model is fully machined from stress-relieved 4142 chrome-moly steel barstock hardened to Rc 28-32 for maximum strength. Titanium model is made from high quality hot-forged billet not a casting Mfg: Sadlak Industries SPECS: 57/16 (13.8cm) long 2 (5.1cm) wide 1 3/4 (4.4cm) high. Includes mounting hardware Allen wrenches and complete instructions. Steel - 4142 chrome-moly steel hardened to Rc 28-32 mil-spec manganese phosphate Parkerized matte black. 11.8 oz. (334g) wt. Titaniu

Retail Price: $289.99

More Information about Sadlak Industries M14 M1a Tactical Scope Mount Sadlak Industries Optics Mounting

Midwest Industries Inc point Ak 47 74 Scope Mount Midwest Industries, Inc. Optics Mounting

Midwest Industries Inc point Ak 47 74 Scope Mount Midwest Industries, Inc. Optics Mounting

Customer Rating For Midwest Industries Inc point Ak 47 74 Scope Mount Midwest Industries, Inc. Optics Mounting

FEATURES: Attaches to rifles with a built-in AK receiver interface High quality 1913 mil-spec rails t-marked Constructed from 6061 aluminum Hardcoat anodized Steel parts have Melonite finish ADM auto lock system Rail measures 6.75 weighs 7.3oz BENEFITS: ADM auto lock system allows for repeat zero and no tool adjustment 100% made in the USA Low profile keeps the height of the optic as low as possible Attaches to the common AK side scope rail Mfg: Midwest Industries Inc.

Retail Price: $109.95

More Information about Midwest Industries Inc point Ak 47 74 Scope Mount Midwest Industries, Inc. Optics Mounting

Midwest Industries Inc point Aimpoint Mount Midwest Industries, Inc. Optics Mounting

Midwest Industries Inc point Aimpoint Mount Midwest Industries, Inc. Optics Mounting

Customer Rating For Midwest Industries Inc point Aimpoint Mount Midwest Industries, Inc. Optics Mounting

Bantam-weight aluminum mounts allow you to attach your Aimpoint sight for standard eye relief or farther forward for use with night-vision optics. Cantilever mount moves the sight 2 1/2 forward and gives plenty of room for a rear-mounted night-vision monocular. Standard version puts the sight at the right height for true co-witness use with a back-up sight. Machined from 6061 aluminum and hard-anodized for added strength and scratch-resistance. Cross-bolt with integral recoil lug and large surface contact area gives you rock-solid mounting and repeatable zero when mounted on picatinny/Weaver-style rails. Military thumbscrew is easy to grasp with your fingers and can be Mfg: Midwest Industries Inc. SPECS: 6061 aluminum black hard-anodized finish. Fits 30mm diameter sights. Cantilever Mount - 3-15/16 (10cm) long .1 (2.5cm) high from top of base to bottom of ring. Standard Mount - 1 1/2 (3.8cm) long .950 high from top of base to bottom of ring.

Retail Price: $124.95

More Information about Midwest Industries Inc point Aimpoint Mount Midwest Industries, Inc. Optics Mounting

Wilcox Industries Comp M Mount Wilcox Industries Optics Mounting

Wilcox Industries Comp M Mount Wilcox Industries Optics Mounting

Customer Rating For Wilcox Industries Comp M Mount Wilcox Industries Optics Mounting

Compact tactical mount securely positions an Aimpoint red dot optic the correct height above a flattop receiver rail. Fits Aimpoint CompC3/M2/ML2/M3/ML3 series 3XMAG magnifier and other optics with 30mm tube that require single-ring mounting. Skeletonized construction provides full support without the weight of excess metal for an exceptionally strong solid yet lightweight mount. Four steel hex-head cap screws anchor the top ring half to the mount to ensure full contact with sight body to prevent slippage. Rail Grabber clamping system secures the mount to receiver and maintains sight alignment even under the battering of sustained rapid fire. Unique captive cross-bolt is divided lengt Mfg: Wilcox Industries SPECS: Aluminum hardcoat anodized matte black finish. Height measured from top of rail to bottom of scope tube: 1.120 (2.84cm). 3.1 oz. (88g) weight. Fits Aimpoint CompC3/M2/ML2/M3/ML3 3XMAG magnifier and other optics that require a single 30mm ring mount.

Retail Price: $164.99

More Information about Wilcox Industries Comp M Mount Wilcox Industries Optics Mounting