Locate Sadlak Industries M14 M1a Gas System Cleaning Drills Sadlak Industries Gunsmith Tools Supplies

Sadlak Industries M14 M1a Gas System Cleaning Drills Sadlak Industries Gunsmith Tools Supplies

Sadlak Industries M14 M1a Gas System Cleaning Drills Sadlak Industries Gunsmith Tools Supplies

Top Rated Sadlak Industries M14 M1a Gas System Cleaning Drills Sadlak Industries Gunsmith Tools Supplies
Customers Top Rated Product!

Retail Price: $13.99

Add to Cart




Drill-type cleaning tools quickly break loose and remove hard-to-get-at carbon buildup from the gas plug and gas piston internal bores. Just insert the hardened steel scraping bit and twist back-and-forth; dual scraping edges clean in both directions. Small enough to store in a range bag or cleaning kit. Ergonomically shaped aluminum handles give you a comfortable secure grip for maximum torquing action. Gas Plug Drill is .316 diameter for the gas plug bore. Piston Drill Set - .180 and .323 diameter drills for thorough cleaning of the piston bores. Mfg: Sadlak Industries SPECS: Bits Hardened carbon steel. Handles 6061 T6 aluminum O.D. green. Gas Plug Drill - O -size. .316 (8mm) dia. 15/8 (4cm) long bit. Piston Drills - #15: .180 (4.6mm) dia. 2 (5.1cm) long bit. P -size: .323 (8.2mm) dia. 1.
Sadlak Industries M14 M1a Gas System Cleaning Drills Sadlak Industries Gunsmith Tools Supplies
Product Number: Rifle Tools
Brand: Sadlak Industries
Category: Gunsmith Tools & Supplies

More Information on Sadlak Industries M14 M1a Gas System Cleaning Drills Sadlak Industries Gunsmith Tools Supplies






Products Other People Bought Sadlak Industries M14 M1a Gas System Cleaning Drills Sadlak Industries Gunsmith Tools Supplies

Sadlak Industries M14 M1a Reinforced Quick Disconnect Post Sadlak Industries Shooting Accessories

Sadlak Industries M14 M1a Reinforced Quick Disconnect Post Sadlak Industries Shooting Accessories

Customer Rating For Sadlak Industries M14 M1a Reinforced Quick Disconnect Post Sadlak Industries Shooting Accessories

Reinforced post replaces the front sling swivel stud to provide a more secure attachment point for quick-detach bipods. Two steel plates provide a much greater surface area than the standard swivel post to help ensure a tight hold during heavy recoil and rough handling. One plate fits in the barrel channel the other on the outside of the stock and they clamp together with a steel Allen head screw and threaded swivel stud. Can be permanently bedded in the stock for added support. Accepts all bipods that mount to the standard sling swivel stud. Mfg: Sadlak Industries SPECS: Steel Parkerized matte black. 17/16 (3.7cm) long x 1/2 (1.3cm) wide. .6oz. (17g) weight. Drilling of stock required; instructions included.

Retail Price: $39.99

More Information about Sadlak Industries M14 M1a Reinforced Quick Disconnect Post Sadlak Industries Shooting Accessories

Sadlak Industries M14 M1a Tactical Scope Mount Sadlak Industries Optics Mounting

Sadlak Industries M14 M1a Tactical Scope Mount Sadlak Industries Optics Mounting

Customer Rating For Sadlak Industries M14 M1a Tactical Scope Mount Sadlak Industries Optics Mounting

Helps keep the weight down when adding heavy tactical optics to your M14/M1A. Three-point design clamps down solidly without alteration to the side receiver ring charger guide dovetail and receiver mount lug. Precision-cut rail includes 5deg angle milled on the underside for easy case ejection without hang-ups; accepts Picatinny and Weaver-style rings. Open sight channel gives unobstructed view of back-up iron sights. Standard model is available in three strength-to-weight combinations. Steel model is fully machined from stress-relieved 4142 chrome-moly steel barstock hardened to Rc 28-32 for maximum strength. Titanium model is made from high quality hot-forged billet not a casting Mfg: Sadlak Industries SPECS: 57/16 (13.8cm) long 2 (5.1cm) wide 1 3/4 (4.4cm) high. Includes mounting hardware Allen wrenches and complete instructions. Steel - 4142 chrome-moly steel hardened to Rc 28-32 mil-spec manganese phosphate Parkerized matte black. 11.8 oz. (334g) wt. Titaniu

Retail Price: $289.99

More Information about Sadlak Industries M14 M1a Tactical Scope Mount Sadlak Industries Optics Mounting

Sadlak Industries M14 M1a Operating Rod Spring Guide Sadlak Industries Rifle Parts

Sadlak Industries M14 M1a Operating Rod Spring Guide Sadlak Industries Rifle Parts

Customer Rating For Sadlak Industries M14 M1a Operating Rod Spring Guide Sadlak Industries Rifle Parts

Solid one-piece design features four milled flats to reduce weight and friction for smooth operation and long service life; helps eliminate magazine catch failures. Guide body is turned to .344 diameter from 8020 tool steel. Integral CNC-machined magazine catch means no more broken welds or bent stampings halfway through your range work. Heat-treated in a vacuum furnace to maintain straightness. Mfg: Sadlak Industries SPECS: 8620 hardened tool steel Mil-Spec manganese phosphate finish.

Retail Price: $38.99

More Information about Sadlak Industries M14 M1a Operating Rod Spring Guide Sadlak Industries Rifle Parts

Sadlak Industries M14 M1a Tactical Magazine Release Sadlak Industries Rifle Parts

Sadlak Industries M14 M1a Tactical Magazine Release Sadlak Industries Rifle Parts

Customer Rating For Sadlak Industries M14 M1a Tactical Magazine Release Sadlak Industries Rifle Parts

Extra large easy-to-reach magazine release lever replaces the original factory part for fast positive mag changes during combat or competition. Oversize pad with vertical serrated surface provides perfect alignment with your finger for a positive no-slip release in all weather conditions. Machined from case hardened steel for added durability then Parkerized for superior wear resistance and corrosion protection. Mfg: Sadlak Industries SPECS: Steel Parkerized finish. Hardened to Rc 55. 1-13/16 (2.6cm) OAL. Pad - 13/16 (4.6cm) long x 13/16 (4.6cm) wide. .7 oz. (19.8g) weight. Minor fitting required includes mounting pins.

Retail Price: $44.99

More Information about Sadlak Industries M14 M1a Tactical Magazine Release Sadlak Industries Rifle Parts

Sadlak Industries M14 M1a Gas Piston Sadlak Industries Rifle Parts

Sadlak Industries M14 M1a Gas Piston Sadlak Industries Rifle Parts

Customer Rating For Sadlak Industries M14 M1a Gas Piston Sadlak Industries Rifle Parts

Precision machined 420 stainless steel pistons are highly polished and heat treated for a smooth hard surface that resists carbon build-up reduces friction and helps maintain critical tolerances for improved service life and reduced gas cylinder cleanings. Smooth surface Stainless Steel piston is micro-finished then electro-polished to prevent rounding of the gas grooves for smooth reliable cycling and extended service life. Titainium Nitride model adds an extra hard TiN coating for increased protection against burnt-in powder fouling corrosion and excessive heat build-up. Also helps reduce wear of the push grooves for more consistent gas pressure. Mfg: Sadlak Industries SPECS: 420 stainless steel hardened to Rc 50. 3.620 (9.2cm) long x .497 (1.3cm) piston diameter.1.6 oz. (45.4g) wt. Stainless Steel - Polished finish. Titanium Nitride - Titanium Nitride gold finish. Surface hardened to Rc 80.

Retail Price: $33.00

More Information about Sadlak Industries M14 M1a Gas Piston Sadlak Industries Rifle Parts

Sadlak Industries Ar 15 M16 Gas Blocks Sadlak Industries Rifle Parts

Sadlak Industries Ar 15 M16 Gas Blocks Sadlak Industries Rifle Parts

Customer Rating For Sadlak Industries Ar 15 M16 Gas Blocks Sadlak Industries Rifle Parts

Aluminum or steel gas blocks give the choices you need to create a custom-built rifle with a mission-specific configuration. Mounts securely to barrel with included setscrews. Clamp-on models squeeze around the barrel as you tighten the side-mounted setscrews. Slip-on models are anchored by setscrews on the underside. Low Profile fits under a free-float handguard and lets you use a longer on carbine-length barrels for a clean streamlined look with more gripping surface. Extended Nose is like Low-Profile but with an extended sleeve that covers taper pin holes left by the issue A2-style sight tower. Varmint fits heavy .936 O.D. barrels. Bull Barrel includes a 3-slot low or high Pica Mfg: Sadlak Industries SPECS: 6061 T6 aluminum hardcoat anodized black or 1018 alloy steel Parkerized black. Barrel O.D. measured at gas port. SKU BBL. DIA. LENGTH WIDTH HEIGHT WEIGHT 10

Retail Price: $47.99

More Information about Sadlak Industries Ar 15 M16 Gas Blocks Sadlak Industries Rifle Parts

Mc Cann Industries M1 Garand Adjustable Gas System Mc Cann Industries Gunsmith Tools Supplies

Mc Cann Industries M1 Garand Adjustable Gas System Mc Cann Industries Gunsmith Tools Supplies

Customer Rating For Mc Cann Industries M1 Garand Adjustable Gas System Mc Cann Industries Gunsmith Tools Supplies

Five interchangeable gas jet screws to apply just the right amount of gas to work the action. Softens the recoil impulse gives a slower cycle time that reduces wear and battering on op rod bolt cam trigger group and receiver. Lets you control case ejection velocity plus prevents dented case necks. Just remove the gas jet screw for conversion to manually cycled single shot function. Mfg: Mc Cann Industries SPECS: Steel blue matte finish. Replaces existing gas nut with no modifications to rifle.

Retail Price: $40.00

More Information about Mc Cann Industries M1 Garand Adjustable Gas System Mc Cann Industries Gunsmith Tools Supplies

Nic Industries Inc point Cerakote Air Dry Ceramic Coatings Nic Industries, Inc. Gunsmith Tools Supplies

Nic Industries Inc point Cerakote Air Dry Ceramic Coatings Nic Industries, Inc. Gunsmith Tools Supplies

Customer Rating For Nic Industries Inc point Cerakote Air Dry Ceramic Coatings Nic Industries, Inc. Gunsmith Tools Supplies

State-of-the-art Cerakote(TM) Firearm Coatings provide a durable weather- and corrosion-proof ceramic-based protective finish that resists scratching chipping and abrasive cleaning solvents. Hardener and paint chemically bond into an ultra-thin coating that adheres to almost any surface for a clean professional finish. Apply with your airbrush or HVLP touch-up gun for a smooth finish. Air Dry requires no baking and is tack free in 40 minutes completely dry in 24 hours and fully cured in 5 days. Mfg: Nic Industries Inc. SPECS: Air Dry Kit - Premixed and includes 4 fl. oz. Cerakote (4) funnel filters and instructions. Finishes up to 6 handguns or 2 to 3 long guns.

Retail Price: $39.99

More Information about Nic Industries Inc point Cerakote Air Dry Ceramic Coatings Nic Industries, Inc. Gunsmith Tools Supplies