Locate Sunny Hill Remington 700 Maximized Recoil Lug Sunny Hill Rifle Parts

Sunny Hill Remington 700 Maximized Recoil Lug Sunny Hill Rifle Parts

Sunny Hill Remington 700 Maximized Recoil Lug Sunny Hill Rifle Parts

Top Rated Sunny Hill Remington 700 Maximized Recoil Lug Sunny Hill Rifle Parts
Customers Top Rated Product!

Retail Price: $29.99

Add to Cart




Machined slightly thicker than the factory part for added stiffness to eliminate lug flex or twisting under heavy recoil. Inner and outer dimensions are similar to the original factory dimensions for a smooth seamless receiver to barrel fit. Factory barrel installation may require setting the shoulder forward. Mfg: Sunny Hill SPECS: Chrome moly (CM) in-the-white or stainless steel (SS) natural finish. 1.72 (4.37cm) long 1.35 (3.4cm) wide .240 (6.10mm) thick. 1.064 (2.70cm) bore I.D. Fits Remington 700..
Sunny Hill Remington 700 Maximized Recoil Lug Sunny Hill Rifle Parts
Product Number: Stock & Forend Parts
Brand: Sunny Hill
Category: Rifle Parts

More Information on Sunny Hill Remington 700 Maximized Recoil Lug Sunny Hill Rifle Parts






Products Other People Bought Sunny Hill Remington 700 Maximized Recoil Lug Sunny Hill Rifle Parts

Sunny Hill Pete Grisel Designed Custom Floorplate Sunny Hill Rifle Parts

Sunny Hill Pete Grisel Designed Custom Floorplate Sunny Hill Rifle Parts

Customer Rating For Sunny Hill Pete Grisel Designed Custom Floorplate Sunny Hill Rifle Parts

Machined steel one-piece Oberndorf-type triggerguard assemblies designed for the Custom Gun Builder by Pete Grisel. Straight sided integral magazines (on Model 70 and Mauser 98 units) and a 5deg draft or taper on the floorplate edges greatly cuts inletting time gives tightest fit. Fully engravable polished to a 220 grit finish and can be inletted into the original stock. A beautiful addition to any fine custom-built rifle. Mfg: Sunny Hill SPECS: Models and sizes as follows - Pre-64 Model 70: #610 for .30-06; #630 for .375 H&H; #640 for .375 H&H w/dropped magazine; Mauser 98: #410 for .30-06; #420 for Short Magnums w/standard magazine; #430 for Short Magnums w/dropped magazine; #440 for .375 H&H (full length m

Retail Price: $564.99

More Information about Sunny Hill Pete Grisel Designed Custom Floorplate Sunny Hill Rifle Parts

Sunny Hill M 98 Straddle Floorplate Sunny Hill Rifle Parts

Sunny Hill M 98 Straddle Floorplate Sunny Hill Rifle Parts

Customer Rating For Sunny Hill M 98 Straddle Floorplate Sunny Hill Rifle Parts

Machined steel one-piece mauser style floorplate is slightly oversized to overlap the triggerguard for a custom fit. Polished to a 220 grit finish and in-the-white ready for custom engraving. A beautiful addition to any fine custom-built rifle. Same as original 1909 Argentine style bottom metal. Mfg: Sunny Hill SPECS: Steel in-the-white. Fits standard M98 long action triggerguard. Floorplate - 4.1 (10.4cm) long tapers .95 (2.4cm) to 1.15 (2.9cm) wide.

Retail Price: $89.95

More Information about Sunny Hill M 98 Straddle Floorplate Sunny Hill Rifle Parts

Sunny Hill Neidner Butt Plate Grip Cap Sunny Hill Gunsmith Tools Supplies

Sunny Hill Neidner Butt Plate Grip Cap Sunny Hill Gunsmith Tools Supplies

Customer Rating For Sunny Hill Neidner Butt Plate Grip Cap Sunny Hill Gunsmith Tools Supplies

Now back in production the classic Neidner-style checkered steel butt plates and grip caps give a secure no-slip surface plus that touch of traditional elegance. Curved butt plate with pointed heel tip is functional and comfortable. Single-screw grip cap is smooth on the outside edge with raised checkered oval in the center. Screws included. Mfg: Sunny Hill SPECS: Steel blued checkered. Butt Plate; 5-1/16 (12.8cm) x 1 1/2 (3.8cm). 3 (7.6cm) c-to-c hole spacing. Grip Cap; 1-13/16 (4.6cm) x 1-5/16 (3.3cm).

Retail Price: $4.15

More Information about Sunny Hill Neidner Butt Plate Grip Cap Sunny Hill Gunsmith Tools Supplies

Sunny Hill Skeleton Grip Cap Sunny Hill Gunsmith Tools Supplies

Sunny Hill Skeleton Grip Cap Sunny Hill Gunsmith Tools Supplies

Customer Rating For Sunny Hill Skeleton Grip Cap Sunny Hill Gunsmith Tools Supplies

Traditional style skeleton grip cap creates the perfect contrast between wood and metal for a professional exhibition grade appearance. Outer edge is machined to form a stepped contour that provides a shadow-line appearance. Inner edge contains a slight convex curve for faster cleaner inletting. Includes high-top screws that can be crowned or fitted flush with the cap surface. Mfg: Sunny Hill SPECS: Chrome moly in-the-white. 1.8 (4.6cm) long x 1.3 (3.3cm) wide. 5/32 (4.1mm) thick.

Retail Price: $39.99

More Information about Sunny Hill Skeleton Grip Cap Sunny Hill Gunsmith Tools Supplies

Yankee Hill Machine Co point Inc point Ar 15 M16inch smooth inchFree Float Handguard Yankee Hill Machine Co., Inc. Rifle Parts

Yankee Hill Machine Co point Inc point Ar 15 M16inch smooth inchFree Float Handguard Yankee Hill Machine Co., Inc. Rifle Parts

Customer Rating For Yankee Hill Machine Co point Inc point Ar 15 M16inch smooth inchFree Float Handguard Yankee Hill Machine Co., Inc. Rifle Parts

Lightweight machined aluminum forearm combines the accessory mounting versatility of a quad-railed forearm with a smooth un-railed area for support hand comfort to aid in enhanced weapon control. Integral full-length Picatinny top rail plus forward 2.5 rails on the sides and bottom offer plenty of attachment space for lights lasers optics backup sights and other accessories. Modular design accepts a variety of bolt-on YHM accessories available below. Smooth areas are drilled and tapped to accept Add-On Rails for additional accessory mounting options. Side and bottom rails have receptacles for Threaded Swivel Studs; also accepts YHM Forearm End Cap. YHMs f Mfg: Yankee Hill Machine Co. Inc. SPECS: Aluminum mil-spec hardcoat anodized matte black. Carbine 9 1/4 (23.5cm) OAL 2 1/2 (6.4cm) diameter. 12.4 oz. (352g) weight. Fits AR-15/M16 with carbine-length gas system. Rifle 12 1/2 (31.8cm) OAL 2 1/2 diameter. 16.6 oz. (471g)

Retail Price: $139.99

More Information about Yankee Hill Machine Co point Inc point Ar 15 M16inch smooth inchFree Float Handguard Yankee Hill Machine Co., Inc. Rifle Parts

Yankee Hill Machine Co point Inc point Diamond Pattern Free Float Handguard Yankee Hill Machine Co., Inc. Rifle Parts

Yankee Hill Machine Co point Inc point Diamond Pattern Free Float Handguard Yankee Hill Machine Co., Inc. Rifle Parts

Customer Rating For Yankee Hill Machine Co point Inc point Diamond Pattern Free Float Handguard Yankee Hill Machine Co., Inc. Rifle Parts

Diamond-shaped vents in a unique latticework pattern give your weapon a distinctive look and provide superb airflow to prevent barrel from overheating. Helps keep your hand cool too while reducing weapons overall weight. Provides four full-length Picatinny rails for maximum flexibility in mounting tactical accessories. Four full-length Picatinny rails provide maximum flexibility in mounting tactical accessories. Machined from high-grade 6061 T6 aluminum and mil-spec hardcoat anodized to withstand combat and heavy-duty usage. Extended top rail gives a gap-free fit to receiver rail. Slots are marked alphanumerically to help identify accessory locations. Threaded front end accepts Yankee Mfg: Yankee Hill Machine Co. Inc. SPECS: 6061 T6 aluminum mil-spec hardcoat anodized matte black. Carbine 7 1/4 (23.5cm) OAL 2 1/2 (6.4cm) dia. 12.5 oz. (354g) weight. Fits AR-15/M16 with carbine-length gas system. Mid-Length 9 1/4 (23.5cm) OAL 2 1/2 dia. 15.2 oz. (431g) wt

Retail Price: $139.99

More Information about Yankee Hill Machine Co point Inc point Diamond Pattern Free Float Handguard Yankee Hill Machine Co., Inc. Rifle Parts

Yankee Hill Machine Co point Inc point Rifle Thread Protectors Yankee Hill Machine Co., Inc. Rifle Parts

Yankee Hill Machine Co point Inc point Rifle Thread Protectors Yankee Hill Machine Co., Inc. Rifle Parts

Customer Rating For Yankee Hill Machine Co point Inc point Rifle Thread Protectors Yankee Hill Machine Co., Inc. Rifle Parts

FEATURES: Available for standard bull and pencil barrels Knurled exterior Available in 1/2 -28 with outer diameters of .920 .720 and .635 Available in 5/8 -24 with outer diameters of .920 and .720 Also available in 9/16 -24 for FALS with an OD of .635 9/16 -24 FAL model has a plated finishBENEFITS: Prevent the threads on your barrel from becoming damaged when a muzzle device is not installed Especially handy when switching muzzle devices Knurled exterior makes these easy to install and remove Can be matched up to your barrel OD Mfg: Yankee Hill Machine Co. Inc.

Retail Price: $12.99

More Information about Yankee Hill Machine Co point Inc point Rifle Thread Protectors Yankee Hill Machine Co., Inc. Rifle Parts

Yankee Hill Machine Co point Inc point Phantom 5c1 Comp Flash Hider Yankee Hill Machine Co., Inc. Rifle Parts

Yankee Hill Machine Co point Inc point Phantom 5c1 Comp Flash Hider Yankee Hill Machine Co., Inc. Rifle Parts

Customer Rating For Yankee Hill Machine Co point Inc point Phantom 5c1 Comp Flash Hider Yankee Hill Machine Co., Inc. Rifle Parts

Flat non-serrated muzzle face helps prevent catching or snagging muzzle tip during storage or deployment. Five longitudinal vents help hide flash while dispersing gases up and outward; tames muzzle rise and keeps your front sights on target. Outward facing ports and solid panel on bottom help eliminate dust signature when shooting in the prone position. For threaded barrels only includes crush washer. .223 model has grooved base rings that accept training attachments and sound suppression devices for LE and military personnel. Mfg: Yankee Hill Machine Co. Inc. SPECS: Steel mil-spec phosphate coating. .223 - 1/2 - 28 tpi. 2 1/4 (5.7cm) long 7/8 (2.2cm) diameter. 2.1 oz. (60 g) wt. .308 - 5/8 -24 tpi. 215/16 (7.5cm) long. 1 (2.5cm) diameter. 4.5 oz. (127g) wt.

Retail Price: $29.99

More Information about Yankee Hill Machine Co point Inc point Phantom 5c1 Comp Flash Hider Yankee Hill Machine Co., Inc. Rifle Parts